Abstract—The main objective of writing review on warpage optimization of injection molded plastic part is to investigate the optimization techniques used for minimization of warpage by optimizing process parameters
نویسندگان
چکیده
The main objective of writing review on warpage optimization of injection molded plastic part is to investigate the optimization techniques used for minimization of warpage by optimizing process parameters during injection molding. Highly complex design of plastic products now a days demands dimensional accuracy and good surface finish. As the injection molded part cools, uneven distribution of stresses is set up due to uneven cooling. These stresses warp the part and affect the dimensional accuracy of the part. So as to keep the warpage minimum, accurate prediction of optimum process parameters is very important. This review paper considers warpage as a main defect in the injection molded part. This paper presents an idea about research undertaken or completed on optimization of process parameters to minimize warpage, optimization techniques used, role of Finite Element Analysis (FEA) and most significant process parameters affecting the warpage.
منابع مشابه
Optimization of the injection molding process of Derlin 500 composite using ANOVA and grey relational analysis
Warpage and shrinkage control are important factors in proving the quality of thin-wall parts in injection modeling process. In the present paper, grey relational analysis was used in order to optimize these two parameters in manufacturing plastic bush of articulated garden tractor. The material used in the plastic bush is Derlin 500. The input parameters in the process were selected according ...
متن کاملOptimization of Dimensional Deviations in Wax Patterns for Investment Casting
Investment casting is a versatile manufacturing process to produce high quality parts with high dimensional accuracy. The process begins with the manufacture of wax patterns. The dimensional accuracy of the model affects the quality of the finished part. The present study investigated the control and optimization of dimensional deviations in wax patterns. A mold for an H-shaped wax pattern was ...
متن کاملWarpage Prediction in Plastic Injection Molded Part Using Artificial Neural Network
The main objective of this paper is to predict the warpage of a circular injection molded part based on different processing parameters. The selected part is used as spacers in automotive, transmission, and industrial power generation industries. The second goal is facilitating the setup of injection molding machine without (any) need for trial and error and reducing the setup time. To meet the...
متن کاملFiber Reinforcement Induced Warpage on Injection Molded Thermoplastics
1 Abstract The warpage characterizations of injection molded plastic parts are not standardized and very challenging due to its complex process. This paper presents a novel examination method of the deformation of injection molded plastic parts especially for fiber reinforced materials. A special, but simple part was introduced for the description of the effect of different technological parame...
متن کاملOptimization of injection molding process parameters using integrated artificial neural network model and expected improvement function method
In this study, an adaptive optimization method based on artificial neural network model is proposed to optimize the injection molding process. The optimization process aims at minimizing the warpage of the injection molding parts in which process parameters are design variables. Moldflow Plastic Insight software is used to analyze the warpage of the injection molding parts. The mold temperature...
متن کامل