Numerical Modeling of Heavy Ion Induced Stress Waves in Solid Targets
نویسندگان
چکیده
The target is cylinder with a length = 7 mm and radius = 5 mm. One face of the cylinder is irradiated with a uranium beam having a particle energy of 400 MeV/u. The beam pulse consists of two bunches, each having a full width at half maximum (FWHM) of 80 ns and the total pule duration is 500 ns. The beam focal spot size (FWHM of the Gaussian power distribution in transverse direction) is assumed to be 0.5 mm. Two different values for beam intensity, N are used.
منابع مشابه
Numerical Modeling of water-waves induced by landslides with WC-MPS method
The rapid movement of sediments, which is often induced by a very erosive and transient flow in rivers and rivers, causes a lot of geomorphology and engineering problems. Failure of the dam with a moving bed, submerged landslide, sedimentation flushing in reservoirs are just a few examples of these problems. The study of waves is challenging due to the interference of several complex physical p...
متن کاملEffect of Initial Stress on Propagation of Love Waves in an Anisotropic Porous Layer
In the present paper, effect of initial stresses on the propagation of Love waves has been investigated in a fluid saturated, anisotropic, porous layer lying in welded contact over a prestressed, non-homogeneous elastic half space. The dispersion equation of phase velocity has been derived. It has been found that the phase velocity of Love waves is considerably influenced by porosity and anisot...
متن کاملModeling of Vertical Breakwater Wall under Bilateral Seawater Load
Floating breakwaters are widely used due to their various advantages over stationary breakwaters. Lots of researches have been done on hydrodynamics and the type of bracing of these kinds of structures in recent years. In this study, numerical modeling of stresses caused by collision waves has been investigated. For this purpose, samples of floating breakwaters have been modeled in ANSYS softwa...
متن کاملTorsional Waves in Prestressed Fiber Reinforced Medium Subjected to Magnetic Field
The propagation of torsional waves in a prestressed fiber-reinforced half-space under the effect of magnetic field and gravity has been discussed. The problem has been solved analytically using Whittaker function to obtain the exact solution frequency equations. Numerical results for stress, gravity and magnetic field are given and illustrated graphically. Comparisons are made with the results ...
متن کاملNumerical Calculations of Ship Induced Waves
Nowadays, various numerical methods are developed to extend computational fluid dynamics in engineering applications. One of the most useful methods in free surface modeling is Boundary Element Method (BEM). BEM is used to model inviscid fluid flow such as flow around ships. BEM solutions employ surface mesh at all of the boundaries. In order to model the linear free surface, BEM can be modifie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007