Investigation of interfacial behavior during the flow boiling CHF transient

Vertical upflow boiling experiments were performed in pursuit of identifying the trigger mechanism for subcooled flow boiling critical heat flux (CHF). While virtually all prior studies on flow boiling CHF concern the prediction or measurement of conditions that lead to CHF, this study is focused on events that take place during the CHF transient. High-speed video imaging and photomicrographic techniques were used to record the transient behavior of interfacial features from the last steady-state power level before CHF until the moment of power cut-off following CHF. The video records show the development of a wavy vapor layer which propagates along the heated wall, permitting cooling prior to CHF only in wetting fronts corresponding to the wave troughs. Image analysis software was developed to estimate void fraction from the individual video images. The void fraction records for subcooled flow boiling show the CHF transient is accompanied by gradual lift-off of wetting fronts culminating in some maximum vapor layer mean thickness, following which the vapor layer begins to thin down as the transition to film boiling ensues. This study proves the interfacial lift-off model, which has been validated for near-saturated flow boiling CHF, is equally valid for subcooled conditions. 2003 Elsevier Ltd. All rights reserved.