Low-voltage bandgap reference with output-regulated current mirror in 90 nm CMOS
نویسندگان
چکیده
A low-voltage bandgap reference (BGR) circuit is designed and fabricated in a 90 nm CMOS technology. To mitigate error resulting from the mismatch in temperature dependency of the current in the output current mirror device and that of the BGR core, an output-regulated current mirror is incorporated. Experimental results show that the output voltage is 497.2 mV at 258C with a temperature coefficient of 28.3 ppm/8C between 2408C and 808C. The circuit occupies 0.0337 mm and dissipates 276.6 pW with a supply voltage of 1.2 V.
منابع مشابه
A Novel Very High Performance CMOS Current Mirror with extremely low input and ultra high output resistance
In this paper a novel very high performance current mirror is presented. It favorably benefits from such excellent parameters as: Ultra high output resistance (36.9GΩ), extremely low input resistance (0.0058Ω), low output (~0.18V) and low input voltage (~0.18V) operation, very low power consumption (20μW), very low offset current (1pA), ultra wide current dynamic range (150dB), and ultra high a...
متن کاملDesign A New Stable And Low Power Bandgap Reference Circuit Based On Fin-FET Device
This paper describes the design of a bandgap reference, implemented in 32 nm FinFET technology. The paper introduced new method for increasing stability of output voltage of bandgap circuit. In the proposed architecture extra feedback is used for setting the output voltage in fixed voltage. This feedback makesbandgap circuit more stable and speedy employing back gate biasing of the FinFET devic...
متن کاملLow Voltage High Performance High Swing Cascode Current Mirror
A new very high performance low voltage cascode current mirror (CM) circuit is proposed in this work. The CM utilizes the low supply voltage and low input resistance characteristics of a cascode CM. In this CM, cascode configuration is used to obtain a wide operating current range and resistance compensation technique is incorporated to increase the operating bandwidth. The peaking in frequency...
متن کاملHigh PSRR, Low Power Bandgap
This paper describes a new Bandgap Reference (BGR) architecture with low power consumption and high Power Supply Rejection Ratio (PSRR). Implemented in a 65nm CMOS technology, the circuit includes a pre-regulator, a current source and also digital validation for the bandgap voltage. The current consumption is below 4.9μA at 50oC, PSRR of -110dB@1kHz and -61.3dB@10MHz. The reference output volta...
متن کاملA Low Power Low Voltage High Performance CMOS Current Mirror
The current mirrors are one of the most important circuits in designing the analog and mixed-mode circuit. A low power and low voltage high-performance CMOS current mirror with optimized input and output resistance are presented in this paper. SPICE simulations confirm the high-performance CMOS current mirror with power supply close to the threshold voltage of the transistor. In this paper, for...
متن کامل