Direct mechanosynthesis of pure BiFeO3 perovskite nanoparticles: reaction mechanism
نویسندگان
چکیده
In this work, a mechanochemical procedure is proposed as a simple and fast method to synthesize pure BiFeO3 perovskite phase as a nanostructured material without the need for purification treatments, while the mechanochemical reaction mechanism has been investigated and correlated with that of the conventional solid-state reaction. Thus, different milling conditions have been used as a tool for tailoring 10
منابع مشابه
Preparation of phase pure, dense fine grained ceramics by conventional and spark plasma sintering of La-substituted BiFeO3 nanoparticles
High density ceramics of the system Bi1-xLaxFeO3, 0 ≤ x ≤ 0.15, have been prepared starting from nanoparticles obtained by mechanosynthesis. The ceramics have been sintered conventionally at 850oC and by spark plasma sintering (SPS). Sintering conditions have been optimized to obtain single phase ceramics, and the microstructure of the ceramics has been compared. Ceramics prepared conventionall...
متن کاملElectrical properties of stoichiometric BiFeO3 prepared by mechanosynthesis with either conventional or spark plasma sintering
Phase-pure powders of stoichiometric BiFeO3 have been prepared by mechanosynthesis. Ceramics sintered by either conventional heating in air or spark plasma sintering (SPS) followed by oxidative anneal in air are highly insulating with conductivity e.g. ~10 Scm at 300 °C and activation energy 1.15(2) eV, which are comparable to those of a good-quality BiFeO3 single crystal. By contrast, the as-p...
متن کاملStructural, Magnetic and Photocatalytic Properties of BiFeO3 Nanoparticles
Single phase BiFeO3 (BFO) nanoparticles as a visible light photocatalyst were successfully synthesized by thermal decomposition of the glyoxylate precursor. The glyoxylate precursors were formed by the redox reaction between ethylene glycol and nitrate ions. The phase evolution, structure and optical properties of BFO nanoparticles were characterized by X-ray diffraction, electron microscopy an...
متن کاملp-i-n heterojunctions with BiFeO3 perovskite nanoparticles and p- and n-type oxides: photovoltaic properties.
We formed p-i-n heterojunctions based on a thin film of BiFeO3 nanoparticles. The perovskite acting as an intrinsic semiconductor was sandwiched between a p-type and an n-type oxide semiconductor as hole- and electron-collecting layer, respectively, making the heterojunction act as an all-inorganic oxide p-i-n device. We have characterized the perovskite and carrier collecting materials, such a...
متن کاملPreparation, Structure and Selected Catalytic Properties of La2CuO4 Nano Mixed Metal Oxides
The perovskite-structured La2CuO4 nanoparticles have been synthesized via an ultrasonic-assisted co-precipitation route using octanoic acid as organic surfactant, and the phase composition, morphology, lattice parameters and size of nanoparticles are characterized through Fourier transform infrared spectrosco...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014