CAD/CAM of Sculptured Surfaces on Multi-Axis NC Machine: The DG/K-Based Approach
نویسنده
چکیده
CA D/CA M OF SCULPTURED SURFA CES ON A MULTI-A XIS NC MA CHINE: THE DG/K-BA SED A PPROA CH To get CA D/CA M of Sculptured Surfaces on a Mult i-A x is NC Machine: The DG/KBased A pproach eBook, you should click the web link beneath and save the document or gain access to additional information that are highly relevant to CAD/CAM of Sculptured Surfaces on a Multi-Axis NC Machine: The DG/K-Based Approach book.
منابع مشابه
An Instantaneous Rigid Force Model For 3-Axis Ball-End Milling Of Sculptured Surfaces
An instantaneous rigid force model for prediction of cutting forces in ball-end milling of sculptured surfaces is presented in this paper. A commercially available geometric engine is used to represent the cutting edge, cutter and updated part geometries. The cutter used in this work is an insert type ball-end mill. Intersecting an inclined plane with the cutter ball nose generates the cutting...
متن کاملTool Path Generation for Milling of Free Form Surfaces With Feedrate Scheduling
The use of freeform (sculptured) surfaces in the product design process is accelerating at an exponential rate driven by functional as well as esthetics demands. CAD/CAM software is a must in their design and manufacture. While the geometric aspects of the design are relatively wellcovered, issues still remain when it comes to the actual manufacture of freeform surfaces. The major issues are re...
متن کاملAutomatic Tool Path Generation for Robot Integrated Surface Sculpturing System*
In this paper, a surface sculpturing system based on 8-axis robot is proposed, the CAD/CAM software and tool path generation algorithm for this sculpturing system are presented. The 8-axis robot is composed of a 6-axis manipulator and a 2-axis worktable, it carves block of polystyrene foams by heated cutting tools. Multi-DOF (Degree of Freedom) robot benefits from the faster fashion than tradit...
متن کامل5-axis Interpolation and Synchronous Servo Process with NURBS Method
Abstract Nowadays, NURBS (Non-Uniform Rational B-Spline) method is widely used in CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) to represent sculptured curves or surfaces. In this paper, we develop a 5-axis NURBS real-time interpolator and realize it in our developing CNC(Computer Numerical Control) system. At first, we use two NURBS curves to represent tool-tip and tool-axis pat...
متن کاملAn integrated system for NC machining of multi-patch surfaces
We describe an integrated system for NC machining of parts made of multi-patch surfaces. The system enables the user to generate tool paths based on practical metrics such as length, curvature and number of tool paths. We also describe two methods for interfacing with commercial CAD/CAM packages.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008