Commercial Window Glass Tested as Possible High Dose Dosimeter. Electron and Gamma Irradiation

The use of commercial window glass as possible high dose routine dosimeter has been investigated. Glass samples have been irradiated with doses in the range of 1–50 kGy using 60Co γ source, 4 MeV and 12 MeV electron accelerators. The samples were given a post irradiation thermal treatment (150 oC for 20 min) in order to improve the post irradiation stability of the measured specific optical absorbance, since a rapid fading of the optical absorbance has been observed at room temperature immediately after irradiation. The optical absorbance measurements of the irradiated samples, kept in the dark and at room temperature, were carried on for several weeks. The samples submitted to heat treatment showed a decrease of about 10–15% of the specific optical absorbance that became much less pronounced after 10 days from the irradiation. The response of the window glass plates is energy and dose rate dependent. This study shows the feasibility of using commercial window glass as a routine dosimeter in a certain dose range after proper calibration in the irradiation plant where they are going to be used.