Feature-based Analysis of a Multi-Parameter Flow Simulation
نویسندگان
چکیده
In our work we examine a high-dimensional, massive flow data set around an airfoil using a topology-based vortex analysis. The 3D time-dependent flow depends on two additional parameters which are introduced by an active flow control technique aiming at increasing the lift by periodic blowing and suction. In particular, we study the influence of the actuation parameters frequency and intensity of air injection and show how our vortex analysis helps in understanding the underlying physics.
منابع مشابه
Application of the multi-laminate sub-loading surface model in the simulation of a pipe-jacking operation
In this paper a constitutive model formulated in the framework of multi-laminate models is applied to analyze pipe-jacking processes. The multi-laminate -based models consider various integration planes to formulate the stress-strain relationship. This basic feature of the framework has the advantage that yield criteria, flow and hardening rules are formulated on planes rather than in three-dim...
متن کاملEnergy and Exergy Evaluation of Multi-channel Photovoltaic/Thermal Hybrid System: Simulation and Experiment
In this research, a pilot study and analysis of an innovative multi-channel photovoltaic/thermal (MCPV/T) system in a geographic location (35° 44' 35'' N, 50° 57' 25'' E) has been carried out. This system consists of integrating a photovoltaic panel and two PV/T heat-sink converters. The total electrical, exergy and energy efficiencies of the system at air flow rate of 0.005 kg/s and radiation ...
متن کاملNumerical Simulation of Non-Newtonian Inelastic Flows in Channel based on Artificial Compressibility Method
In this study, inelastic constitutive modelling is considered for the simulation of shear-thinning fluids through a circular channel. Numerical solutions are presented for power-law inelastic model, considering axisymmetric Poiseuille flow through a channel. The numerical simulation of such fluid is performed by using the Galerkin finite element approach based on artificial compression method (...
متن کاملCOUPLING MODEL FOR MULTI-COMPONENT GAS PERMEATION PROCESS
A gas permeation model (Coupling Model) has been developed which has the flexibility to be used for different membrane module configurations. The aim of this work is to predict the performance of a single stage gas separation process using membranes and provide a comprehensive description of process parameters like flow rates, composition, stage cut and stream pressure. The significant feature ...
متن کاملThree-dimensional Numerical Simulation of Metal Flow and Solidification in the Multi-cavity Casting Moulds of Automotive Components
The liquid metal flow and the solidification behaviours in a multi-cavity casting mould of two automotive cast parts were simulated in three dimensions. The commercial code, FLOW-3D® was used because it can track the front of the molten metal by a Volume of Fluid (VOF) method and allows complicated parts to be modeled by the Fractional Area/Volume Obstacle Representation (FAVOR) meth...
متن کامل