Metallized polymer film capacitors ageing law based on capacitance degradation
نویسندگان
چکیده
Passive components, particularly capacitors, are very used devices in power electronics applications providing key function on board. Nevertheless, capacitors breakdowns can have catastrophic consequences on the financial and human scale; a good acquaintance of their deterioration over time would contribute in the improvement of the availability of the whole system by performing a predictive maintenance on the component. This operation requires the knowledge of the capacitor ageing law and their failure mechanisms associated to the application. Capacitance loss can be mainly attributed to the self-healing process occurring in metallized film capacitors when used under high steady electrical and thermal stresses. In this paper, a capacitance ageing law is proposed based on the identification of voltage and temperature degradation kinetics from three experimental floating ageing tests performed at different voltage and temperature constraints. A total of 34 capacitors provided from different manufacturers using polyester film as dielectric have been studied and compared to validate the proposed law. Corresponding author: [email protected] Tel: +33 (4) 72 43 11 73; Fax: +33 (4) 72 43 11 93 Metallized polymer film capacitors ageing law based on capacitance degradation M. Makdessi, A. Sari, P. Venet
منابع مشابه
Thermal simulation for geometric optimization of metallized polypropylene film capacitors
In this paper, we use an analytic model to calculate the losses in the metallized polypropylene film capacitors. The model is validated experimentally for capacitors having the same capacitance but different geometry. For each group of capacitors a temperature distribution in the roll is assumed with the aim of optimizing its thermal performance. It appears that the heating of a long capacitor ...
متن کاملHealth Monitoring of DC link Capacitors
Electrolytic and metallized polypropylene film (MPPF) capacitors are among the most popular capacitors used in electronic equipments. The choice of capacitors is of major importance because one of the most frequent causes of the equipment breakdowns results from the failure of capacitors, and will therefore determine the overall lifetime of the system. Electrolytic capacitors present higher cap...
متن کاملAccelerated Ageing of Aluminum Electrolytic Capacitor
Electrolytic capacitors are extensively used in filtering and power decoupling in power electronic converters. Low cost and high energy density of these capacitors make them popular. However, these capacitors degrade with age due to heating and evaporation of electrolyte. This process may take about 2 to 7 years depending on the application, ambient conditions and capacitor construction. This p...
متن کاملMinimizing the Dc-link Capacitance of a Two-stage Pv-inverter by Predictive Current Control – Increasing Reliability and Reducing Cost by Means of Control
The goal of this work is to reduce the DC-link capacitance of a two-stage single-phase inverter so much that the use of film capacitors becomes feasible in both, price and volume. Film capacitors instead of electrolytic capacitors could increase lifetime and reliability of the inverter, especially in high-temperature applications like module-integrated micro-inverters. For the capacitance reduc...
متن کاملExperimental Studies of Ageing in Electrolytic Capacitors
Understanding the ageing mechanisms of electronic components critical avionics systems such as the GPS and INAV are of critical importance. Electrolytic capacitors and MOSFET’s have higher failure rates among the components of DC-DC power converter systems. Our current work focuses on analyzing and modeling electrolytic capacitor degradation and its effects on the output of DC-DC converter syst...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Microelectronics Reliability
دوره 54 شماره
صفحات -
تاریخ انتشار 2014