Power Management in Portable Systems Using MAX II CPLDs
ثبت نشده
چکیده
Introduction Portable system designers are concerned with minimizing the static and dynamic current draw of all components within a battery-powered system. This application note highlights the very low static and dynamic power capabilities of MAX® II CPLDs. It also reviews circuit design techniques that allow MAX II devices to achieve zero stand-by current. In addition, MAX II devices can be used as a smart power control manager to power-up and power-down other system components making them zero power.
منابع مشابه
Using MAX II CPLDs as Analog Keyboard Encoders
Introduction Keyboard encoders are a very common application for CPLDs. Typically a processor, ASSP, or ASIC does not have enough pins for keypads or keyboards. I/O expansion is a very common function for CPLDs and allows a processor to decode a very large keyboard with very few I/Os. Even though CPLDs like MAX® and MAX® II may have abundant low-cost I/Os, decoding a keypad or keyboard with one...
متن کاملUsing LEDs as Light-Level Sensors and Emitters
Modulating LED power based on ambient light level increases battery life, a particularly helpful feature in a device where battery life is measured in days. Using a very simple circuit, Altera’s MAX II and MAX IIZ CPLDs can measure the analog light level of their environments and then drive an LED at a proportional analog intensity level. Controlling the LED intensity based on ambient light as ...
متن کاملFPGA Design Security Solution Using MAX II Devices
This document provides a solution to prevent the FPGA designs from being copied. It allows the FPGA design to remain secure even if the configuration bitstream is captured. This is accomplished by disabling the functionality of the user design within the FPGA until handshaking tokens are passed to the FPGA from the MAX ® II device. The MAX II devices are selected for generating the handshaking ...
متن کاملAn Experimental and Comparative Analysis of the Battery Charge Controllers in Off-Grid PV Systems
The study of the battery charge process as the only power storage agent in off-grid systems is of significant importance. The battery charge process has different modes, and the battery in these modes is dependent on the amount of charge. In order to charge the battery in off-grid systems, two charge controllers including Pulse Width Modulation (PWM) and Maximum Power Point Tracker (MPPT) are c...
متن کاملThe Optimization of Energy Supply Systems by Sequential Streamflow Routing Method and Invasive Weed Optimization Algorithm; Case Study: Karun II Hydroelectric Power Plant
Among the major sources of energy supply systems, hydroelectric power plants are more common. Energy supply during peak hours and less environmental issues are some of the most important advantages of hydroelectric power plants. In this study, designing parameters to supply maximum amount of energy was determined by using the simulation-optimization perspective and combination of IWO-WEAP model...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006