Modelling and Simulation in Materials Science and Engineering
نویسندگان
چکیده
The extended and generalized finite element methods are reviewed with an emphasis on their applications to problems in material science: (1) fracture, (2) dislocations, (3) grain boundaries and (4) phases interfaces. These methods facilitate the modeling of complicated geometries and the evolution of such geometries, particularly when combined with level set methods, as for example in the simulation growing cracks or moving phase interfaces. The state of the art for these problems is described along with the history of developments.
منابع مشابه
Emergency department resource optimisation for improved performance: a review
Emergency departments (EDs) have been becoming increasingly congested due to the combined impacts of growing demand, access block and increased clinical capability of the EDs. This congestion has known to have adverse impacts on the performance of the healthcare services. Attempts to overcome with this challenge have focussed largely on the demand management and the application of system wide p...
متن کاملModelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool
Based on the cutting force theory, the cutting stress in end milling operation was predicted satisfactorily through simulation of using finite element method. The mechanistic force models were introduced in high accuracy force predictions for most applications. The material properties in the simulations were defined based on the cutting force theory, as a function of strain and strain rate wher...
متن کاملTen years of severe plastic deformation (SPD) in Iran, part I: equal channel angular pressing (ECAP)
The superior properties of ultrafine-grained materials fabricated by severe plastic deformation (SPD) have attracted the attention of many researchers around the world. Among the top-ranked countries that are active in this field, Iran is interesting because of the late beginnings of SPD in this country and, subsequently, the highest rate of growth in the number of publications during the last...
متن کاملInvestigation of concentration polarization in a cross-flow nanofiltration membrane: Experiment and CFD modelling
Numerous researches have been investigated on the mass transfer phenomena and hydrodynamics for the fluid in the vicinity of the membrane surface by the mathematical modelling and simulation. Due to complexities involved in solving transport phenomena within membranes, the application of CFD simulation study for determining the concentration polarization (CP) profile in the membrane channel is ...
متن کاملMATHEMATICAL MODELLING OF THE EFFECT OF FOAM DEGRADATION ON MOULD FILLING IN THE GREY IRON EPC PROCESS
In this investigation a new model was developed to calculate gas pressure at the melt/foam interface (Gap) resulting from foam degradation during mould filling in the Lost Foam Casting (LFC) process. Different aspects of the process, such as foam degradation, gas elimination, transient mass, heat transfer, and permeability of the refractory coating were incorporated into this model. A Computati...
متن کاملHeat Transfer Modelling in Wide Gap Rail Thermite Welding
In the current study, a thermal model was used to investigate the effects of welding parameters on the distribution of temperature in wide gap aluminothermic rail welds. To solve the governing thermal equation, SUTCAST, a finite difference program (FDM) was employed while different aspects such as phase change and convective heat transfer in weld pool were taken into account in the numerical so...
متن کامل