Investigation into nanocellulosics versus acacia reinforced acrylic films
نویسندگان
چکیده
Three closely related oRUulosic q l i c latex 6ims were prepared employing acacia pulp fibers, cellulose whiskers and daclocellulose balls and their respective strength properties were determined. Wulose whisker reinforced composites had &md stl.ength properties compGired to the acacia pulp and nanoball composites. APM analysis indicated that the d u b w h i s h &or& composite exhibited d e c r d surface rougherrs. Published by Ekevim Ltd.
منابع مشابه
Biodegradable Colour Polymeric Film (Starch-Chitosan) Development: Characterization for Packaging Materials
Biodegradable starch-based chitosan reinforced composite polymeric films were prepared by casting. The chitosan content in the films was varied from 20% to 80% (w/w). Tensile strength (TS) was improved significantly with the addition of chitosan but elongation at break (EB %) of the composites decreased. Tensile strength of the composites raised more with the addition of the acacia catechu cont...
متن کاملEffect of Water Storage on the Flexural Strength of Heat-cured Denture Base Resin Reinforced with Stick (s) Glass Fibers
BACKGROUND Flexural strength (FS) of denture base resins (DBRs) had been improved by reinforcing it with different glass fibers. However, a limited data are available on the effect of glass fiber reinforcement with conventional heat-cured resin after prolonged water storage. AIMS AND OBJECTIVES This study aimed to evaluate the reinforcing effect of novel S-glass and nylon fibers on the FS of ...
متن کاملTensile strength and impact strength of color modified acrylic resin reinforced with titanium dioxide nanoparticles
BACKGROUND Poor mechanical properties are among the main limitations of acrylic resins. Addition of titanium dioxide (TiO2) nanoparticles to acrylic resin has been shown to improve its mechanical properties with an adverse effect on its color. Thus, this study sought to assess the tensile and impact strength of a color modified heat cure acrylic resin reinforced with TiO2 nanoparticles. MATER...
متن کاملAn Investigation of Fracture Loads of Acrylic Base Plates Reinforced, Non-reinforced and Prepared in Different Palatal Shapes Farkli Damak Şeki̇lleri̇nde Takvi̇ye Edi̇len Ve Edi̇lmeyen Kai̇de Plaklarinin Kirilma Kuvvetleri̇ni̇n İncelenmesi̇
Maxillary denture bases having three types of palatal vault shapes –shallow, medium and deep– were used in this study. The reinforced materials used were the round metal wire-diametered in 1.50 mm, semirounded metal wire -thickened 1.50×0.75 mmand the stainless steel mesh (70mmx2.5mmx2.5mm). A total of 132 acrylic denture bases were prepared with the conventional method from heat-cured acrylic ...
متن کاملAn Investigation into the Impact and Flexural Strength of Light Cure Denture Resin Reinforced with Carbon Nanotubes
The aim of the study was to investigate the flexural and impact strength of 3 commercially available denture base resins after reinforcing them with single walled carbon nanotubes (SWCNT’S). Each acrylic resin was first solubilised in Tetrahydrofuran (THF) and then carbon nanotubes were added in different percentages respectively. A total of 50 specimens were made from each material (Eclipse, T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007