Aluminium Pneumoconiosis. I. in Vitro Comparison of Stamped Aluminium Powders Containing Different Lubricating Agents and a Granular Aluminium Powder.

نویسنده

  • B CORRIN
چکیده

The discrepancy in previous reports of the action of aluminium on the lung may be explained by differences between stamped and granular aluminium powders. A stamped powder of the variety causing pulmonary fibrosis showed a brisk reaction with water, but a granular powder was unreactive. This difference is primarily due to the granular particles being covered by inert aluminium oxide, the formation of which is partially prevented in the stamping process by stearine and mineral oil. The reactivity of the flake-like stamped particles is also dependent on their large surface area per unit volume. The appearance of aluminium pneumoconiosis in Britain is explained by the introduction of mineral oil into the stamping industry for, in contrast to stearine, mineral oil permits the powder to react with water. The lung damage is believed to be caused by a soluble form of aluminium.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Oxygen Determination in Aluminium Iron Pre-Alloyed Powders by Nuclear Reaction Analysis

Oxygen content in aluminium alloys Al-3Fe or Al-8Fe-lZr (wt%) maked from air atomized powders by a sinter-forging

متن کامل

Effect of Slow Cooling in Reducing Pore Size in a Sintered Powder Metallurgical 6061Aluminium Alloy

The usage of powder metallurgy aluminium compacts in lieu of ferrous components in automotives helps to lower vehicle weight. The major drawback in the commercially available press sintered aluminium alloy is porosity which is mainly dependent on the powder metallurgical process parameters such as compaction pressure, sintering temperature and cooling rate after sintering. In this paper the eff...

متن کامل

پوشش‌دهی پودر آلومینیم به منظور غیرحساس سازی و کاربرد در محیط‌های آبی (علمی-پژوهشی)

In the last decade, superfine powders of metals synthesized by several methods have become widely used in a number of different fields of material science. Superfine aluminum powders (SFAPs) have a broad application in energetic formulations. Aluminum powders have a high combustion enthalpy, which is why they are widely used in propellants, explosives and pyrotechnics. The decrease in the size ...

متن کامل

Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process

In this research, the feasibility of using mathematical modelling in the ball milling process has been evaluated to verify the hardness changes of an aluminium nanostructure. Considering the model of normal force displacement (NFD), the radius of elastic-plastic and normal displacement of two balls were computed by applying analytical modelling and coding in MATLAB. Properties of balls and alum...

متن کامل

The Bainitic Phase Transformation in Aluminium Containing Ductile Irons after Short Time of Austempering

The influence of aluminium on the microstructure of austempered ductile cast iron (ADI) has been studied. A number of irons of different compositions have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. Austenitising was carried out at different temperatures and holding times for a variety of experimental irons to achieve suff...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • British journal of industrial medicine

دوره 20  شماره 

صفحات  -

تاریخ انتشار 1963