Asymptotic behavior of a structure made by a plate and a straight rod
نویسندگان
چکیده
This paper is devoted to describe the asymptotic behavior of a structure made by a thin plate and a thin rod in the framework of nonlinear elasticity. We scale the applied forces in such a way that the level of the total elastic energy leads to the Von-Kármán’s equations (or the linear model for smaller forces) in the plate and to a one dimensional rod-model at the limit. The junction conditions include in particular the continuity of the bending in the plate and the stretching in the rod at the junction.
منابع مشابه
The Effect of Square Splittered and Unsplittered Rods in Flat Plate Heat Transfer Enhancement
A square splittered and unsplittered rod is placed in a turbulent boundary layer developed over a flat plate. The effect of the resulting disturbances on the local heat transfer coefficient is then studied. In both cases the square rod modifies the flow structure inside the boundary layer. As a result, a stagnation point, a jet and wake area are generated around the square rod, each making a co...
متن کاملAsymptotic behavior of structures made of straight rods
This paper is devoted to describe the deformations and the elastic energy for structures made of straight rods of thickness 2δ when δ tends to 0. This analysis relies on the decomposition of the large deformation of a single rod introduced in [7] and on the extension of this technique to a multi-structure. We characterize the asymptotic behavior of the infimum of the total elastic energy as the...
متن کاملEffect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate
A rectangular rod is placed in a flow field flowing parallel to a flat plate. Effect of chord-thickness ratio of rectangular rod on developing vortex shedding downstream to the rod is studied. Then, for each one of the aspect ratios, the distance of the rod from the neighboring flat plate is reduced until the rod sticks to the flat plate. In each case, the effect of the flat plate boundary laye...
متن کاملJunction between a plate and a rod of comparable thickness in nonlinear elasticity. Part II
We analyze the asymptotic behavior of a junction problem between a plate and a perpendicular rod made of a nonlinear elastic material. The two parts of this multi-structure have small thicknesses of the same order δ. We use the decomposition techniques obtained for the large deformations and the displacements in order to derive the limit energy as δ tends to 0.
متن کاملEffect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate
A rectangular rod is placed in a flow field flowing parallel to a flat plate. Effect of chord-thickness ratio of rectangular rod on developing vortex shedding downstream to the rod is studied. Then, for each one of the aspect ratios, the distance of the rod from the neighboring flat plate is reduced until the rod sticks to the flat plate. In each case, the effect of the flat plate boundary laye...
متن کامل