Design Consideration of Different Volute Casing at Best Efficiency Point for Commercial
نویسندگان
چکیده
1, Ravi Shastri , 2, Anjani Kumar Singh , 3, Manish Kumar Singh 1, Asst. Prof. Cambridge Institute of Technology, Tatisilway, Ranchi, Jharkhand, India 2, Ph.D. Scholar, Materials and metallurgical Engineering National Institute of Foundry and Forge Technology, Hatia, Ranchi, Jharkhand, India 3, M.Tech, Materials Science and Engineering, National Institute of Foundry and Forge Technology, Hatia, Ranchi, Jharkhand, India
منابع مشابه
Design and Performance Analysis of Centrifugal Pump
This paper deals with the design and performance analysis of centrifugal pump. In this paper, centrifugal pump is analyzed by using a single-stage end suction centrifugal pump. Two main components of a centrifugal pump are the impeller and the casing. The impeller is a rotating component and the casing is a stationary component. In centrifugal pump, water enters axially through the impeller eye...
متن کاملSimulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection
In this paper, a simulation-based method is proposed for optimal placement of vibration sensors for the purpose of fault detection in a centrifugal pump. The centrifugal pump is modeled to investigate the effect of vane tip fault on fluid flow patterns numerically. Pressure pulsations are investigated at different locations at the inner surface of the pump before and after the presence of the f...
متن کاملImpeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves
Now a day centrifugal pumps are vital components of industries. Certainly, one of the most important specifications of centrifugal pumps are the performance curves. In the present work, performance curves of a centrifugal pumps are obtained by Computational fluid dynamics (CFD) and as an outcome, CFD results compare by practical curves. At the first step impeller and volute are designed with tw...
متن کاملThe Effect of Volute Design On The Performance Of A Turbocharger Compressor
An investigation has been carried out to assess the effect of volute design on the performance of a centrifugal compressor. Three volutes, based on a turbocharger compressor volute, have been fabricated and tested. These volutes provided two that were larger than the original design, and one that was smaller. The alternative volute designs were fabricated from sheet steel and had a square cross...
متن کاملInvestigation of Hydraulic Problems in Pumping Station; Case Study
Pumping stations play an important role in agriculture development projects. Performance of the pumping stations should satisfy water requirements, and management. There are many problems face these pumping stations affecting their reliability and stability. Hydraulic problems are the most important item in the field of pumping station operation and design. Motivation of this research was prese...
متن کامل