Turbulent Bubbly Flow

A Study of Flow and Mixing in Bubbly Gas-Liquid Pipe Flow Generated by a Grid

The spreading of a tracer in a bubbly two-phase grid-generated turbulent flow system is studied. In this work both particle image velocimetry (PIV) and planer laser-induced <span style="font-size: 10pt...

Computational Fluid Dynamics Modeling of Downward Bubbly Flows

Downward turbulent bubbly flows in pipes were modeled using computational fluid dynamics tools. The Hydrodynamics, phase distribution and turbulent structure of twophase air-water flow in a 57.15 mm diameter and 3.06 m length vertical pipe was modeled by using the 3-D Eulerian-Eulerian multiphase flow approach. Void fraction, liquid velocity and turbulent fluctuations profiles were calculated a...

Detached direct numerical simulations of turbulent two-phase bubbly channel flow

DNS simulations of two-phase turbulent bubbly channel flow at Res = 180 (Reynolds number based on friction velocity and channel half-width) were performed using a stabilized finite element method (FEM) and a level set approach to track the air/water interfaces. Fully developed turbulent single-phase solutions obtained previously using the same stabilized FEM code were used as the initial flow f...

Turbulent bubbly flow in pipe under gravity and microgravity conditions

Bubbly turbulent drag reduction is a boundary layer effect.

In turbulent Taylor-Couette flow, the injection of bubbles reduces the overall drag. On the other hand, rough walls enhance the overall drag. In this work, we inject bubbles into turbulent Taylor-Couette flow with rough walls (with a Reynolds number up to 4 x 10(5), finding an enhancement of the dimensionless drag as compared to the case without bubbles. The dimensional drag is unchanged. As in...