Optimization of Machining Parameters for Face Milling Operation using ANOVA
نویسندگان
چکیده
To remain successful in today’s competitive market, the manufacturers should rely on their Engineers and production professionals for quick and effective manufacturing setup and also to achieve Quality products. The machining process on a CNC Milling is programmed by speed, feed rate, and cutting depth, which are frequently determined based on the job shop experiences However, the machine performance and the product characteristics are not guaranteed to be acceptable. Therefore, the optimum Face Milling conditions have to be accomplished. This will increase the setup time and decrease the productivity. It will be interesting to machine EN19/EN31 steel with PVD and CVD coated tools on FANUC series Vertical CNC Milling for these types of experiments. At the end of this experiment, the effective of machining parameters for good surface finish are determined.
منابع مشابه
Application of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts
Face milling is an important and common machining operation because of its versatility and capability to produce various surfaces. Face milling is a machining process of removing material by the relative motion between a work piece and rotating cutter with multiple cutting edges. It is an interrupted cutting operation in which the teeth of the milling cutter enter and exit the work piece during...
متن کاملModelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool
Based on the cutting force theory, the cutting stress in end milling operation was predicted satisfactorily through simulation of using finite element method. The mechanistic force models were introduced in high accuracy force predictions for most applications. The material properties in the simulations were defined based on the cutting force theory, as a function of strain and strain rate wher...
متن کاملOptimization of Surface Roughness in High-speed End Milling Operation Using Taguchi’s Method
This paper presents the optimization of high speed milling process parameters with respect to the surface roughness of samples and the study of the Taguchi design application to surface quality in a CNC end milling operation. The Taguchi design is an efficient and effective experimental method in which a response variable can be optimized given various control factors using fewer resources than...
متن کاملMachining Parameters Selection for Milling Operations Using Shuffled Frog-Leaping Algorithm
This paper introduces a Shuffled Frog-Leaping Algorithm based method for the optimization of machining parameters for milling operations. An objective function based on maximum profit in milling operation has been used. The algorithm is compared with others techniques and outperforms the results reached by standard shuffled frogleaping algorithm, differential evolution, particle swarm optimizat...
متن کاملProcess parameters optimization on machining force and delamination factor in milling of GFRP composites using grey relational analysis
In this study, the optimization of process parameters for milling of glass fiber reinforced polymer (GFRP) composites using grey relational analysis has been investigated. Experiments are conducted using helix angle, spindle speed, feed rate, depth of cut and fiber orientation angle as typical process parameters. The grey relational analysis (GRA) is adopted to obtain grey relational grade for ...
متن کامل