Scale - up of a High - Technology Manufacturing Startup : Improving Product Reliability Through

Ensuring product reliability is a key driver of success during the scale-up of a hightechnology manufacturing startup. Reliability impacts the company image and its financial health, however most manufacturing startups do not have a solid understanding of their product's reliability. The purpose of this thesis is to introduce systematic failure analysis to the engineering design process and to establish a framework for testing and analyzing product life so that imperative business decisions and design improvements could be made with regards to reliability. A detailed study and implementation of these process improvements to address reliability issues was conducted at New Valence Robotics Corporation (NVBOTS) in Boston, Massachusetts. Systematic failure analysis was achieved through the creation and implementation of Failure Modes and Effects Analysis (FMEA) procedures. A single FMEA iteration was performed on the NVPro printer to identify the top risk component-linear ball bushings-for detailed life analysis. Following an in-depth investigation of potential failure modes of the linear bushings, an Accelerated Life Test (ALT) was designed using Design of Experiments (DOE) principles. An accompanying test apparatus with mechatronic control was also designed. The ALT was not actually executed but representative data was analyzed for illustrative purposes using the General Log-Linear (GLL) life-stress relationship and a 2-parameter Weibull distribution for the accelerating stresses of mechanical load and lubrication. The work performed provides NVBOTS and similar high-technology manufacturing startups a complete starting point for systematically analyzing their product's reliability and quantitatively evaluating its life in a resource efficient way. Thesis Supervisor: David E. Hardt Title: Ralph E. and Eloise F. Cross Professor of Mechanical Engineering