Early PC-based Validation of ECU Software Using Virtual Test Driving
ثبت نشده
چکیده
Steffen Schmidt is Managing Director at the IPG Automotive GmbH in Karlsruhe (Germany). Josef Henning is Product Manager Simulation Solutions at the IPG Automotive GmbH in Karlsruhe (Germany). Thomas Wambera is Project Manager Virtualisation Solutions at the Etas GmbH in Stuttgart (Germany). Silke Kronimus is Project Manager Virtualisation Solutions at the Etas GmbH in Stuttgart (Germany). Early PC-based Validation of ECU Software Using Virtual Test Driving
منابع مشابه
Preadjustment of a Vision-based Lane Tracker Using Virtual Test Drive within a Hardware in the Loop Simulator
In this paper, it is shown that synthetic images can be used to preadjust a lane tracking algorithm which is developed by Audi. This was achieved by setting up a heterogeneous hardware-in-the-loop testbed. It includes the highly configurable and extendable simulation “Virtual Test Drive”. The main components are a traffic simulation, visualization and a sensor model which supplies ground truth ...
متن کاملChip simulation used to run automotive software on PC
Simulation has great potential to improve the development process for automotive ECUs. Simulation helps to move development tasks to PC, where they often can be performed faster, cheaper or better. However, development tasks such as calibration and test are typically performed by an OEM, while the ECU code is owned by the supplier of the ECU. Therefore, the OEM is often unable to set up a simul...
متن کاملTowards Virtual Validation of ECU Software using FMI
Connected, Automated, Electrified. These three trends in the automotive industry require rethinking of the use of simulation respectively models. The use of models for evaluation of new concepts or stimulating the unit-undertest (in HiL testing), already firmly rooted in the development process of software functions, will not be sufficient to realize visions like autonomous driving or update-ov...
متن کاملFaster Development of AUTOSAR compliant ECUs through simulation
Virtualization allows the simulation of automotive ECUs on a Windows PC executing in a closed-loop with a vehicle simulation model. This approach enables moving many development tasks from road or test rigs and HiL (Hardware in the loop) to PCs, where they can often be performed faster and cheaper. Technical challenge: How to port ECU tasks and basic software to Windows PC with reasonable effor...
متن کاملVirtualisation Validation of over 200 Transmission Variants on Pc
Transmission control units are often developed and calibrated for dozens or hundreds of vehicle variants. Not every possible variant is physically realised during development. Even the simulation of all variants on a HiL becomes infeasible with growing number of variants, since at least the control unit must then be physically realised and integrated into the HiL system. In such variant-rich ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015