Thermo-chemical Characteristics of Powder Fabricated by Oxidation of Spent PWR Fuel

نویسنده

  • Geun - Il Park
چکیده

Thermochemcial characteristics of powder fabricated using oxidation treatment of spent PWR fuel and SIMFUEL were evaluated for recycling of spent fuel such as DUPIC process. Especially, the influence of spent fuel burn-ups on the powder fabrication characteristics was experimentally evaluated, ranging from 27,300 to 65,000 MWd/tU. Densities of powder manufactured from an oxidation, OREOX and the milling processes at the same process conditions were compared as a function of the fuel burn-ups respectively. Also, based on chemical analysis results, homogeneity of fissile elements in oxidized powder was confirmed. Keywords—Spent PWR fuel, DUPIC, Oxidation, OREOX, Powder, Chemical analysis

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of Nuclear Proliferation Resistance of DUPIC Fuel Cycle

This study compares the proliferation resistance of DUPIC (Direct Use of Spent PWR Fuel in CANDU) fuel cycle with other fuel cycle cases. The other fuel cycles considered in this study are PWR of once-through mode (PWR-OT), PWR of reprocessing mode (PWR-MOX), in which spent PWR fuel is reprocessed and recovered plutonium is used for making MOX (Mixed Oxide), CANDU with once-through mode (CANDU-...

متن کامل

Optimization of DUPIC Cycle Environmental

A study of the DUPIC (Direct Use of Spent PWR Fuel In CANDU) cycle was made to analyze cycle performance relative to that of PWR and CANDU fuel cycles in terms of uranium utilization and spent fuel production efficiency. The DUPIC cycle was found to be most efficient in terms of minimizing spent fuel production as well as most efficient (within limits) in terms of maximizing natural uranium uti...

متن کامل

Fabrication and Characterization of Nanostructured TiO2 and Turmeric Spent Incorporated Polystyrene Hybrid Nano Composites

A series of polystyrene hybrid nanocomposites have been fabricated with varying amounts of TiO2 viz., 0, 0.5 and 1 % w/w along with 3% TS by in-situ polymerization method. The influence of surface modified TiO2 nanoparticles on the thermal properties of PS matrix was examined using thermogravimetry and differential scanning calorimetry. Thermal characteristics of the polystyrene/TS/TiO2 hybrid ...

متن کامل

Transmutation of Dupic Spent Fuel in the Hyper System

In this paper, the transmutation of TRUs of the DUPIC (Direct Use of Spent PWR Fuel in CANDU) spent fuel has been studied with the HYPER system, which is an LBE-cooled ADS. The DUPIC concept is a synergistic combination of PWRs and CANDUs, in which PWR spent fuels are directly reutilized in CANDU reactors after a very simple re-fabrication process. In the DUPICHYPER fuel cycle, TRUs are recover...

متن کامل

Enhanced Catalytic Activity of Pt-NdFeO3 Nanoparticles Supported on Polyaniline-Chitosan Composite Towards Methanol Electro-Oxidation Reaction

In this work, NdFeO3 nanoparticles were synthesized through a simple co-precipitation method. The formation of NdFeO3 particles was verified by X-ray powder diffraction, infrared spectroscopy, vibrating sample magnetometer, and transmission electron microscopy analysis. Polyaniline and chitosan were employed as proper support for production of metal nanoparticles. Novel Pt...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012