Bauschinger Effect Design Procedures for Autofrettaged Tubes including Material Removal and Sachs' Method
نویسندگان
چکیده
1
منابع مشابه
The Investigation of Modelling Material Behavior in Autofrettaged Tubes Made from Aluminium Alloys
Normal 0 false false false EN-US X-NONE AR-SA The ratio of compression yield strength to the initial tensile yield strength is called Bauschinger effect factor, BEF. A nonlinear strain hardening mathematical model is proposed for 7075 aluminium alloy (A7075). Uniaxial tension-compression experimental data are used to figure out a suitable model to study the BEF. Hence, uniaxial tension-co...
متن کاملParametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials
In this paper, the effect of autofrettage process parameters on the ultimate pressure that functionally graded spherical vessel can tolerate are investigated. FGM properties and autofrettage pressure are considered as important parameters. Assumptions are variation of properties of FGM in radial direction, the residual stress in the absence of Bauschinger effect with the operation of variable m...
متن کاملUltimate Load Capacity and Behavior of Thin-Walled Curved-Steel Square Struts, Subjected to Compressive Load
There have been some experimental tests on hollow curved-steel struts with thin-walled square sections, in order to investigate their general behavior, particularly their capacity for bearing differing loads. One set of square tubes are cold-formed into segments of circular arcs with curvature radii, equal to 4000 mm. Different lengths of curved struts are fabricated so as to cover a practical ...
متن کاملEvaluation of the efficacy of hysterosalpingography test for the removal of fallopian tube obstruction and infertility treatment in women in Sistan and Baluchestan province
Introduction: Infertility has increased in Iran due to age, inappropriate nutrition and marriage. One of the causes of infertility is the blockage of the uterine tubes. Hysterosalpingography(HSG) is a non-invasive method used to examine the uterus of the uterus. In this method, by inserting the contrast agent through the vagina into the uterus, there is a possibility of partial...
متن کاملImproving Mechanical Properties, Especially Increasing Tubes’ Strength by Micro structuring Metals Using Severe Plastic Deformation Method
Increasing material’s strength is of particular importance. Improving material’s mechanical properties such as strength could reduce the size and weight of the structure. The size and weight of the structure are among the effective parameters in design. Since the past a variety of methods have been developed to increase the strength of metals that are capable of increasing metals’ strength to a...
متن کامل