Anomalous behavior of normal kinematic restitution in the oblique impacts of a hard sphere on an elastoplastic plate.

نویسندگان

  • Michel Y Louge
  • Michael E Adams
چکیده

We observe oblique impacts of a hard aluminum oxide sphere on a thick elastoplastic polycarbonate plate by recording stroboscopic photographs of the sphere trajectory and spin. The apparent kinematic coefficient of normal restitution grows monotonically with the magnitude of the tangent of the angle of incidence, and the apparent coefficient of friction decreases with increasing normal impact velocity. Although every collision dissipates the total kinetic energy of the sphere, we observe restitution coefficients exceeding unity for the most grazing impacts. We exploit this example to confirm that, although an apparent kinematic coefficient of normal restitution below one is sufficient to guarantee dissipation of kinetic energy in any collision, this condition is not necessary for oblique impacts of spheres on a plate.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Impacts on a stationary tetrahedral array of spheres

We report the peculiar behavior of the oblique impacts of a single sphere on stationary like spheres arranged in a tetrahedral array. We compare the resulting kinematic coefficient of normal restitution to that in impacts on a single sphere attached to a thick plate and in binary impacts. The results provide detailed insight into the generation of ejecta in the saltation process.

متن کامل

A Computational Wear Model of the Oblique Impact of a Ball on a Flat Plate

Many wearing processes are a result of the oblique impacts. Knowing the effective impact parameters on the wear mechanism would be helpful to have the more reliable designs. The H-DD (Hertz-Di Maio Di Renzo) nonlinear model of impact followed by the time increment procedure is used to simulate the impact process of a ball on a flat plate. Restitution parameters are extracted and compared with t...

متن کامل

Elastoplastic Buckling Analysis of Plates Involving Free Edges by Deformation Theory of Plasticity (RESEARCH NOTE)

Abstract   In this paper elastoplastic buckling of rectangular plates with different boundary conditions are investigated. Differential governing equations of plate are obtained on the basis of general loading and according to deformation theory (DT) of plasticity. Various loading conditions contain uniaxial, biaxial and shear are studied. The employed material is AL7075T6 which is usually used...

متن کامل

Numerical and Experimental Study on Ratcheting Behavior of Steel Cylindrical Shells with/without Cutout Under Cyclic Combined and Axial Loading

Ratcheting behavior of steel 304L cylindrical shell under cyclic combined and axial loading are investigated in this paper, numerically. Cylindrical shells were fixed oblique at angle of 20° and normal with respect to the longitudinal direction of the shell and subjected to force-controlled cycling with non-zero mean force, which causes the accumulation of plastic deformation or ratcheting beha...

متن کامل

A Constitutive Model for Sands

In this paper, an elastoplastic constitutive model is presented for predicting sandy soil behavior under monotonic and cyclic loadings. The model is based on the CJS3 model that takes into account deviatoric and isotropic mechanisms of plasticity. The flow rule in deviatoric mechanism is non-associated and a kinematic hardening law controls the evolution of the &#10yield surface. In the present...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review. E, Statistical, nonlinear, and soft matter physics

دوره 65 2 Pt 1  شماره 

صفحات  -

تاریخ انتشار 2002