A Low Temperature Sensitivity Switched-Capacitor Current Reference
نویسندگان
چکیده
A current reference with low temperature sensitivity based on a switched-capacitor technique has been developed. The implementation is targeted for a 0.18μ CMOS process. HSPICE simulations using level 49 models valid over a wide temperature range were used to verify the design. The simulation results predict variations of less than 0.029% over a temperature range of –40 °C to 125 °C.
منابع مشابه
A Low Voltage Switched-Capacitor Current Reference Circuit with low dependence on Process, Voltage and Temperature
A low voltage switched-capacitor circuit that generates an almost constant reference current across process, voltage and temperature (PVT) is proposed. The reference voltage is generated by a low voltage band-gap circuit. The output reference current is obtained by applying the generated reference voltage to a low voltage V – I converter. The resistor in the proposed V – I converter is further ...
متن کاملGrid Integration of a Single-Source Switched-Capacitor Multilevel Inverter with Boosting Capability
This paper investigates the connection of a single-phase multilevel inverter structure to an existing power grid. The applied voltage source inverter is able to generate a near sinusoidal voltage waveform with an amplitude six times the input voltage by using a single DC input power supply. A proportional-resonant (PR) controller regulates the injected current into the grid. While the EPLL is u...
متن کاملReference Voltage Driver for Low-voltage Cmos A/d Converters
A circuit for generating reference voltages for an A/D converter is presented. The circuit consisting of a bandgap reference and a driver circuit is capable of operating on sub 1-volt supply voltages. The circuit is designed using a standard 0.5 m CMOS technology. Simulations show maximum 0.24% variation in the generated reference voltage over a temperature range from -20 C to 100C and a supply...
متن کاملREFERENCE VOLTAGE DRIVER FOR LOW-VOLTAGE CMOS A m CONVERTERS
A circuit for generating reference voltages for an A D converter is presented. The circuit consisting of a bandgap reference and a driver circuit is capable of operating on sub 1-volt supply voltages. The circuit is designed using a standard 0.5 p m CMOS technology. Simulations show maximum 0.24% variation in the generated reference voltage over a temperature range from -20 "C to I00"C and a su...
متن کاملA Very Low Voltage 9th Order Linear Phase Baseband Switched Capacitor Filter (RESEARCH NOTE)
A very low voltage 9th order linear phase baseband switched capacitor (SC) filter has been designed to be used as part of a cellular GSM (Global System Mobile) receiver. A Gaussian-to-6dB filter of the order of seven is chosen and a second order function is added to reduce the group delay variations around. The filter uses a fully differential topology to increase the dynamic range and reduce t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001