Silicon nanowire oxidation: the influence of sidewall structure and gold distribution.
نویسندگان
چکیده
The oxidation behavior of Si nanowires (SiNWs) grown by the gold (Au) catalyzed vapor-liquid-solid (VLS) growth process in an electron beam evaporation (EBE) reactor is studied. The VLS SiNWs exhibit hexagonal shape with essentially {112} facets where each facet shows a saw-tooth faceting itself, consisting of alternating {111} and {113} facets. Depending on growth temperatures (450-750 degrees C) and evaporation currents (40-80 mA) that determine the silicon vapor supply, this facet formation is more or less pronounced. The diffusion of Au atoms on the faceted SiNW surfaces and the formation of Au nanoparticles on the SiNW facets during growth and during ex situ annealing are studied. Upon diffusion, the Au atoms agglomerate and form Au nanoparticles that preferably arrange themselves on {113} facets. Upon annealing in air at temperatures between 800 and 950 degrees C the gold nanoparticles agglomerate further and form bigger particles of a few tens of nm in diameter that reside at the interface between the growing silica (SiO(2)) layer and the SiNW itself, which in turn shrinks during SiNW oxidation. The oxide layer thickness and the oxide appearance depend on the annealing conditions (time and temperature) and systematically varied oxidation processing is described in this paper as investigated by cross-sectional transmission electron microscopy (TEM) including high resolution studies as well as scanning electron microscopy (SEM) studies. Our results strongly suggest that the SiNWs can be fully oxidized, thus forming silica NWs that can either keep their initial shape or, under certain annealing conditions, do not keep their initial wire shape but assume a bamboo-like shape that forms most likely as a result of locally high stresses that are related to nanocrack formation. The nanocracks form in the growing oxide layer mediated by the presence of Au nanoparticles that yield gold-enhanced SiNW oxidation and thus a faster oxidation rate.
منابع مشابه
Study the Effect of Silicon Nanowire Length on Characteristics of Silicon Nanowire Based Solar Cells by Using Impedance Spectroscopy
Silicon nanowire (SiNW) arrays were produced by electroless method on polycrystalline Si substrate, in HF/ AgNO3 solution. Although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. In order to study the influence of etching time (which affects the SiNWs length) on d...
متن کاملCaractérisation De Nanofils De Silicium Par Microscopie Électronique En Transmission
The goal of this thesis was to better understand and control nanowire growth by the Vapour Liquid Solid method, bymeans of structural, chemical and electronic characterization of nanowires using transmission electron microscopy.A first subject of study was the behavior of the gold catalyst particle. We have shown that control can be obtainedover gold diffusion from the catalyst part...
متن کاملStructural characteristics and connection mechanism of gold-catalyzed bridging silicon nanowires
Lateral, single-crystalline silicon nanowires were synthesized using chemical vapor deposition catalyzed by gold nanoparticles deposited on one of the vertical {1 1 1} sidewalls of trenches etched in Si(0 1 1) substrates. Upon encountering the opposing sidewalls of the trenches, the lateral nanowires formed a mechanically strong connection. The bridging connection at the opposing sidewall was o...
متن کاملPerformance Study and Analysis of Heterojunction Gate All Around Nanowire Tunneling Field Effect Transistor
In this paper, we have presented a heterojunction gate all around nanowiretunneling field effect transistor (GAA NW TFET) and have explained its characteristicsin details. The proposed device has been structured using Germanium for source regionand Silicon for channel and drain regions. Kane's band-to-band tunneling model hasbeen used to account for the amount of band-to...
متن کاملThermal Oxidation Times Effect on Structural and Morphological Properties of Molybdenum Oxide Thin Films Grown on Quartz Substrates
Molybdenum oxide (α-MoO)thin films were prepared on quartz and silicon substrates by thermal oxidation of Mo thin films deposited using DC magnetron sputtering method. The influence of thermal oxidation times ranging from 60-240 min on the structural and morphological properties of the preparedfilms was investigated using X-ray diffraction, Atomic force microscopy and Fourier transform infrared...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Nanotechnology
دوره 20 40 شماره
صفحات -
تاریخ انتشار 2009