An Adaptive Digital Compensation Design for Buck Converter Topology
نویسندگان
چکیده
This paper presents a digital type III compensator that needs no calculation made by a designer. First an analog type III compensator is designed for a buck converter and based on it the digital model is obtained. Both the analog and digital approaches are simulated in PSIM and the digital compensator is written in a Microchip dsPIC for experimental results. The dynamic response of these controllers under input voltage change and load current variations are presented.
منابع مشابه
Digital Controller Designbased on Time Domain for DC-DC Buck Converter
In this paper, the digital controller design for compensating the dc-dc buck converter output voltage has been analyzed in the digital domain. The main idea of this paper is patterning the samples of high order ideal controller and using integral square error in determining digital PID coefficients. This approach provides higher precision of digital controller design and eliminates the need for...
متن کاملA Fully Differential CMOS Telescopic Operational Amplifier with Class AB Output Stage
The design of a fully differential CMOS transconductance operational amplifier is presented. Topology selection, compensation, biasing, and common mode feedback are discussed. Design analysis and simulations are presented demonstrating that the amplifier exceeds the specifications for application in the first stage of a 13-bit pipelined A/D converter, while dissipating an average of 66 mW of po...
متن کاملBidirectional Buck-boost Converter with Variable Output Voltage
An increasing number of manufacturing processes rely on ultra-high speed and accuracy machines. Piezoceramic actuators are being utilized as parts of such machines. So far, only linear and switched-capacitor power supplies have been used for driving piezoceramic actuators in such applications. This paper proposes a switch-mode power supply to reduce cost and increase system efficiency. In the p...
متن کاملA New Topology of Embedded Z-H Buck-Boost Converter
In this paper, a new embedded Z-H (EZ-H) buck-boost converter is proposed. In this topology, two identical dc voltage sources are embedded in a LC network in a series connection with the inductors. The proposed converter eliminates the shoot-through (ST) switching state and there is no need for a front-end diode. Other advantages of the proposed topology are having capability of buck and boost ...
متن کاملA Buck-Boost Converter; Design, Analysis and Implementation Suggested for Renewable Energy Systems
This work introduces a new non-isolated buck-boost DC-DC converter. Interleaved configuration of the suggested structure increases the voltage conversion ratio. The voltage rate of the suggested converter can be stepped-up and stepped down for lower values of duty-cycle, which causes to decrease in the conduction losses of the system. The voltage conversion ratio of the recommended structure is...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011