Solenoid Compensation for the Superb Interaction Region
نویسندگان
چکیده
We present an approach for compensating adverse effects of the detector solenoid in the SuperB Interaction Region (IR). We place compensating solenoids around the IR quadrupole magnets to reduce the magnetic fields nearly to zero. This allows more operational headroom for superconducting IR magnets and avoids saturation of ferric IR magnets. We place stronger compensating solenoids between IR magnets to reverse the magnetic field direction. This allows adjusting the total integrated solenoid field to zero, which eliminates coordinate plane rotation and reduces vertical beam displacements in the IR.
منابع مشابه
Beam Based Solenoid Compensation for the PEP-II
Commissioning the compensation system of the solenoid in the BaBar detector presents a challenging problem due to the complexity of the system, which uses twelve normal quadrupoles and twelve skew quadrupoles in each ring. The setting of these skew quadrupoles needs to be readjusted according to the machine optical parameters since the machines always have some unknown errors. In this paper, we...
متن کاملCompensation of the effects of a detector solenoid on the vertical beam orbit in a linear collider
1098-4402= This paper presents a method for compensating the vertical orbit change through the interaction region that arises when the beam enters the linear collider detector solenoid at a crossing angle. Such compensation is required because any deviation of the vertical orbit causes degradation of the beam size due to synchrotron radiation, and also because the nonzero total vertical angle c...
متن کاملCompensation of Solenoid Effects at the TESLA Interaction Point
To achieve high luminosity, the target vertical beam size at the TESLA interaction point is 5 nm. The long solenoid encompassing the detector introduces coupling effects that increase the vertical beam size. In the case that the last quadrupole of the final focus lies inside the solenoid field, the increase in vertical beam size is by as much as two orders of magnitude. In this note, we describ...
متن کاملDetector Solenoid Compensation in the PEP - I 1 B - Factory *
The PEP-I1 experimental detector includes a strong 1.5 T solenoid field in the interaction region (IR). With the fringe fields, the solenoid extends over a range of 6 m. Additional complications are that 1) it is displaced longitudinally from the interaction point (IP) by about 40 cm, 2) neither beam is parallel to the solenoid axis, and 3) the solenoid overlaps a dipole and a quadrupole on eit...
متن کاملBeam Dynamics of the Interaction Region Solenoid in a Linear Collider Due to a Crossing Angle∗
Future linear colliders may require a nonzero crossing angle between the two beams at the interaction point. This requirement in turn implies that the beams will pass through the strong interaction region (IR) solenoid with an angle, and thus that the component of the solenoidal field perpendicular to the beam trajectory is nonzero. The interaction of the beam and the solenoidal field in the pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010