Recent Advances in the Measurement of Residual Stress by X-Ray Diffraction

نویسنده

  • M. R. James
چکیده

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method

In this study, thin layers of titanium nitride (TiN) were deposited on H13 steel substrates at different duty cycles and temperature of 520 ˚C using plasma assisted chemical vapor deposition (PACVD). Uniaxial residual stress was calculated by X-ray diffraction (XRD) and Sin2 Ψ method. Then the residual stress of the samples were measured by Grazing Incidence X-ray Diffraction (GIXRD) method and...

متن کامل

Residual Stress in Cu Sputtered Films on Glass Substrates at Different Substrate Temperatures

Copper films of 300 nm thickness deposited by planar magnetron sputtering on glass substrates, for substrate temperatures between 300 and 500 K, and deposition rate of 10 ?s?1. Microstructure of these films was obtained by X-ray diffraction, while the texture mode of diffractometer was used for stress measurement by the sin2? technique. The components of the stress tensor are obtained using mea...

متن کامل

Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components

Hot forging is a common manufacturing process for the production of large quantities of engineering components. Residual stresses are developed in forged components as a result of various aspects of the manufacturing process, including subsequent cooling, and heat treatment. Residual stresses can significantly affect the deformation and fatigue failure of materials. Hot forged EN15R steel bars ...

متن کامل

Surface Hardness Measurment and Microstructural Characterisation of Steel by X-Ray Diffraction Profile Analysis

An X-ray diffraction line will broaden considerably when steels change into martensitic structure on quenching. The results presented in this paper show that X-ray diffraction technique can be employed for a rapid and nondestructive measurement of hardness of hardened steel. Measurement on various quenched and tempered steels showed that the breadth of its diffraction peak increased with increa...

متن کامل

Interests of synchrotron radiation for internal stress analysis

The interest of the method of X-ray diffraction for residual stress measurement is in continuous progress due to the advances in theoretical research and the development of new equipment. Usually, the shift and broadening of a diffraction peak reveal respectively the macrostrain (or stress) and rnicrostrain. The limits of the X-ray provided by classical tubes in laboratory are its low intensity...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017