Ordered Peierls distortion prevented at growth onset of GeTe ultra-thin films

نویسندگان

  • Ruining Wang
  • Davide Campi
  • Marco Bernasconi
  • Jamo Momand
  • Bart J. Kooi
  • Marcel A. Verheijen
  • Matthias Wuttig
  • Raffaella Calarco
چکیده

Using reflection high-energy electron diffraction (RHEED), the growth onset of molecular beam epitaxy (MBE) deposited germanium telluride (GeTe) film on Si(111)-(√3 × √3)R30°-Sb surfaces is investigated, and a larger than expected in-plane lattice spacing is observed during the deposition of the first two molecular layers. High-resolution transmission electron microscopy (HRTEM) confirms that the growth proceeds via closed layers, and that those are stable after growth. The comparison of the experimental Raman spectra with theoretical calculated ones allows assessing the shift of the phonon modes for a quasi-free-standing ultra-thin GeTe layer with larger in-plane lattice spacing. The manifestation of the latter phenomenon is ascribed to the influence of the interface and the confinement of GeTe within the limited volume of material available at growth onset, either preventing the occurrence of Peierls dimerization or their ordered arrangement to occur normally.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Selective Growth of α-Sexithiophene by Using Silicon Oxides Patterns

A process for fabricating ordered organic films on large area is presented. The process allows growing sexithiophene ultra-thin films at precise locations on patterned Si/SiO(x) substrates by driving the orientation of growth. This process combines the parallel local anodic oxidation of Si/SiO(x) substrates with the selective arrangement of molecular ultra-thin film. The former is used to fabri...

متن کامل

Peierls distortion mediated reversible phase transition in GeTe under pressure.

With the advent of big synchrotron facilities around the world, pressure is now routinely placed to design a new material or manipulate the properties of materials. In GeTe, an important phase-change material that utilizes the property contrast between the crystalline and amorphous states for data storage, we observed a reversible phase transition of rhombohedral ↔ rocksalt ↔ orthorhombic ↔ mon...

متن کامل

Pulsed laser deposited GeTe-rich GeTe-Sb2Te3 thin films

Pulsed laser deposition technique was used for the fabrication of Ge-Te rich GeTe-Sb2Te3 (Ge6Sb2Te9, Ge8Sb2Te11, Ge10Sb2Te13, and Ge12Sb2Te15) amorphous thin films. To evaluate the influence of GeTe content in the deposited films on physico-chemical properties of the GST materials, scanning electron microscopy with energy-dispersive X-ray analysis, X-ray diffraction and reflectometry, atomic fo...

متن کامل

Temperature and thickness dependence at the onset of perpendicular magnetic anisotropy in FePd thin films sputtered on MgO„001..

The onset of chemical order L10 phase and perpendicular magnetic anisotropy in FePd 001 thin films sputtered on MgO 001 at temperatures from room temperature to 700 °C and thickness between 1.4 and 22 nm are investigated. It is found that the formation of the FePd ordered phase exhibiting high perpendicular magnetic anisotropy L10 phase with the c axis in the growth direction is affected by a t...

متن کامل

Equivalent circuit for VO2 phase change material film in reconfigurable frequency selective surfaces

Articles you may be interested in Development of cap-free sputtered GeTe films for inline phase change switch based RF circuits Ultra-thin perfect absorber employing a tunable phase change material Appl. Carbon-doped Ge2Sb2Te5 phase change material: A candidate for high-density phase change memory application Appl. Ga 2 Te 3 phase change material for low-power phase change memory application Appl.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2016