On the Forces Between Micro and Nano Objects and a Gripper

نویسندگان

  • Galin Valchev
  • Daniel Danchev
  • Kostadin Kostadinov
چکیده

The authors study the van der Waals force FvdW, between the gripper jaw and an object – cubical, spherical and conical in shape, situated at a distance L of closest approach from it. The generic and most general case is considered, when the materials of the working jaw of the gripper and the particle are made of different materials strongly preferring the liquid phase of the fluid being at temperature T and chemical potentialm. The contributions due to the standard van der Waals, as well as of the retarded (Casimir) van der Waals interactions are considered. They concluded that FvdW strongly depends on the contrast, at given fixed T and m, between the physical properties of the fluid and the material of the arms of the gripper and the particle. In addition, as expected, FvdW strongly depends on the shape of the object, its size, and the distance L between it and the working jaw of the gripper. Their approach can be applied to any nonpolar fluid.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Reliable and Accurate Release of Micro-Sized Objects with a Gripper that Uses the Capillary-Force Method

There have been recent developments in grippers that are based on capillary force and condensed water droplets. These are used for manipulating micro-sized objects. Recently, one-finger grippers have been produced that are able to reliably grip using the capillary force. To release objects, either the van der Waals, gravitational or inertial-forces method is used. This article presents methods ...

متن کامل

Analysis of Motion of Micro-Gripper Exposed to the Electric Field and Thermal Stresses for Using in Micro-Robotics

Micro system technology is a relatively new scientific research that deals with the development and study of properties of materials in micro dimensions. Micro-grippers are widely used in switching, positioning, and assembling micron sized components in micro-robotics. In this study, the static and dynamic behavior of visco-elastic Micro-Tweezers under the thermal and electrostatic field is...

متن کامل

Investigation of Cutting Forces Superalloy Inconel 718

Since the cutting tools used in machining process of super alloys are subjected to high cutting forces, accordingly tools life is reduced, therefore improvement in alloys machining and reducing cutting forces to achieve longer tools life is an essential necessity. In this research, the effect of changes in feed rate on cutting forces in machining process of nickel based super alloys is investig...

متن کامل

Characterization of an Inertial Micro Gripper Based on Adhesion Forces

Adhesive forces become predominant in the micro world comparing to the gravity effect implying the development of new micro manipulation strategies. This paper presents the design and conception of a gripper that use the inertial principle for the release (applying a high acceleration, in the order of 10’000g) and the adhesion for catching a micro part of 50μm with the goal of precisely control...

متن کامل

Low Voltage Thermo-mechanically Driven Monolithic Microgripper with Piezoresistive Feedback

Pick-and-place of micro/nano sized objects means handling of very tiny and very different in properties objects having specific behavior. Besides formal requirements of assembly processes, the tools for controllable manipulation with these objects should not affect the examined micro/nano environment, i.e. should be “small and passive” in any sense. Despite of the recent progress, most availabl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • IJIMR

دوره 2  شماره 

صفحات  -

تاریخ انتشار 2012