Analysis of Friction Compensation Effects in Controlled Mechanical Systems
نویسندگان
چکیده
In this paper, the effects of friction compensation, including exact compensation, undercompensation and overcompensation, in PD controlled 1DOF mechanical systems are investigated. The friction force that is acting on the mechanical system and the friction compensation term in the feedback loop are described by a class of discontinuous friction models consisting of static, Coulomb and viscous friction, and including the Stribeck effect. In order to capture the sticking phenomenon at zero velocity, the friction model is expressed as a multi-valued map. Lyapunov’s stability theorem, LaSalle’s invariance principle and the properties of the ω-limit set of trajectories of a 2-dimensional differential inclusion are employed to show that firstly, exact compensation leads to global exponential stability of the setpoint, secondly, undercompensation leads to steady state errors, and thirdly, overcompensation conditionally induces limit cycling.
منابع مشابه
Friction Compensation for Dynamic and Static Models Using Nonlinear Adaptive Optimal Technique
Friction is a nonlinear phenomenon which has destructive effects on performance of control systems. To obviate these effects, friction compensation is an effectual solution. In this paper, an adaptive technique is proposed in order to eliminate limit cycles as one of the undesired behaviors due to presence of friction in control systems which happen frequently. The proposed approach works for n...
متن کاملAdaptive robust control of mechanical systems with non-linear dynamic friction compensation
In this paper, an adaptive robust control (ARC) scheme based friction compensation strategy is presented for a class of mechanical systems in the presence of dynamic friction effects. In contrast to existing deterministic robust control (DRC) and adaptive control (AC) schemes, the proposed ARC scheme utilizes both the structural information of the dynamic friction model and the available prior ...
متن کاملAdaptive Friction Compensation of Servo Mechanisms with Nonlinear Viscous Friction
In this paper, a SDOF system with nonlinear viscous friction under harmonic excitation is studied. A nonlinear viscous friction model is built as an exponential expansion of the relative slip velocity. According to the adaptive control theory, an adaptive controller for the friction compensation of the SDOF system with nonlinear viscous friction is put forward by using the model-based parameter...
متن کاملRobust Nonlinear Controls for Two Problems of Rejecting Disturbances
In this paper we present the design of tow robust nonlinear controllers for two mechanical problems of rejecting disturbances such as eccentricity and friction compensation. In the eccentricity compensation problem, the considered disturbances are here assumed to be produced by eccentricity in mechanical systems and drives, the frequency and amplitude of this disturbance is unknown. The objecti...
متن کاملTime Delay and Data Dropout Compensation in Networked Control Systems Using Extended Kalman Filter
In networked control systems, time delay and data dropout can degrade the performance of the control system and even destabilize the system. In the present paper, the Extended Kalman filter is employed to compensate the effects of time delay and data dropout in feedforward and feedback paths of networked control systems. In the proposed method, the extended Kalman filter is used as an observer ...
متن کامل