CFD modeling of the in-cylinder flow in Direct-injection Diesel engine

Internal combustion engines in now a days is the best available reliable source of power for all domestic, large scale industrial and transportation applications. The major issue arises at the efficiency of these engines. Every attempt made to improve these engines tends to attain the maximum efficiency. The performances of the diesel engines are enhanced by proper design of inlet manifold, exhaust manifold, combustion chamber, piston etc. The study is about the effect of piston configurations on incylinder flow. Here a single cylinder direct injection diesel engine is used for study. For obtaining swirl intensity helicalspiral combination inlet manifold is used. Increase in swirl intensity results in better mixing of fuel and air. Swirl Velocities in the charge can be substantially increased during compression by suitable design of the piston. In the present work, a study on the effect of different piston configuration on air motion and turbulence inside the cylinder of a Direct Injection (DI) diesel is carried out using Computational Fluid Dynamics (CFD) code Fluent 13. Three dimensional models of the manifolds, pistons and the cylinder is created in CATIA V5 and meshed using the pre-processor Hypermesh 10.0.