The Effect of additive on performance and shelf-stability of HSX-1/PCBM photovoltaic devices
نویسندگان
چکیده
Weiwei Li, Yi Zhou, Viktor Andersson, Mattias Andersson, Yi Thomann, Clemens Veit, Kristofer Tvingstedt, Ruiping Qin, Zhishan Bo, Olle Inganäs, Uli Wuerfel and Fengling Zhang, The Effect of additive on performance and shelf-stability of HSX-1/PCBM photovoltaic devices, 2011, Organic electronics, (12), 9, 1544-1551. http://dx.doi.org/10.1016/j.orgel.2011.05.028 Copyright: Elsevier Science B.V., Amsterdam. http://www.elsevier.com/
منابع مشابه
Polymer-fullerene bulk heterojunctions : morphology and its implications on the performance and stability of photovoltaic devices
Over the last decade, great improvements have been made within the field of organic BHJ solar cells. It has become clear that the active layer morphology plays a key role in achieving competitive devices. Within this work, the active layer morphology of several polymer:PCBM systems is correlated with the performance and stability of the corresponding solar cells. The morphology of polymer:fulle...
متن کاملConcentration gradient P3OT/PCBM photovoltaic devices fabricated by thermal interdiffusion of separately spin-cast organic layers
A series of organic photovoltaic devices consisting of concentration gradients of poly (3-octylthiophene) (P3OT) and [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) were fabricated by thermally-induced interdiffusion of consecutively spin-cast layers of P3OT and PCBM from solvents of chloroform and pyridine, respectively. The device performance was evaluated as a function of the layer thickne...
متن کاملReappraising the Need for Bulk Heterojunctions in Polymer-Fullerene Photovoltaics: The Role of Carrier Transport in All-Solution-Processed P3HT/PCBM Bilayer Solar Cells
The most efficient organic solar cells produced to date are bulk heterojunction (BHJ) photovoltaic devices based on blends of semiconducting polymers such as poly(3-hexylthiophene-2,5-diyl) (P3HT) with fullerene derivatives such as [6,6]-penyl-C61-butyric-acid-methyl-ester (PCBM). The need for blending the two components is based on the idea that the exciton diffusion length in polymers like P3...
متن کاملPreparation and Characterization of CA−PEG−TiO2 Membranes: Effect of PEG and TiO2 on Morphology, Flux and Fouling Performance
Modified cellulose acetate (CA) membranes were prepared by dissolving the polymers in a mixture of acetone (AC) and N, N dimethylacetamide (DMAc) (70:30) solvent and deionized (DI) water was used in the coagulation bath. The introduction of polyethylene glycol (PEG) additive and TiO2 nanoparticles (NPs) into the casting solution has changed the structures of the resulting membranes during the p...
متن کاملEffect of PbS Film Thickness on the Performance of Colloidal Quantum Dot Solar Cells
Colloidal quantum dots offer broad tuning of semiconductor band structure via the quantum size effect. In this paper, we present a detailed investigation on the influence of the thickness of colloidal lead sulfide (PbS) nanocrystals (active layer) to the photovoltaic performance of colloidal quantum dot solar cells. The PbS nanocrystals (QDs) were synthesized in a non-coordinating solvent, 1-oc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011