Numerical simulation of thermal flying height control sliders in heat-assisted magnetic recording
نویسندگان
چکیده
Heat assisted magnetic recording (HAMR) is one of the most promising techniques to extend the recording density in hard disk drives beyond 1 Tb/in. Although the diameter of the spot on the disk that is heated by the laser beam is very small, on the order of nanometers, high local temperatures on the disk and the heat dissipated in the slider during the light delivery process can cause thermal deformations of both the disk and the slider, thereby affecting the flying characteristics at the head-disk interface. In this paper, a finite element model is developed which incorporates a HAMR optical system into a thermal flying height control (TFC) slider with dual heater/insulator elements to study the effect of heat dissipation in the wave guide on the thermal deformation and flying characteristics of a HAMR-TFC slider. In addition, the power input of the laser and design parameters of the heaters are investigated.
منابع مشابه
Time dependent simulation of active flying height control of TFC sliders
A time-dependent numerical simulation procedure is implemented to simulate the flying height response of a typical thermal flying height control (TFC) slider as a function of the power input to the heater element. The Reynolds equation is used in conjunction with a TFC slider finite element model to determine the change in the thermal protrusion and flying height of the slider. The power input ...
متن کاملContact and Temperature Rise of Thermal Flying Height Control Sliders in Hard Disk Drives
Contact behavior of thermal flying height control sliders and interfacial temperature rise upon head disk contact is investigated utilizing the resistance change of the read and write element. To achieve contact, the heater element of a TFC slider is energized with constant and square wave input profiles. To estimate the temperature rise during head disk contact, the resistance change of the re...
متن کاملReal-time signal processing for flying height measurement and control in hard drives subject to shock and vibration
Three readback signal detection methods are inyestgated for real-time flying height or head disk spacing variation measurement under vibration conditions. This is carried out by theoretical analysis, numerical simulation, and experimental study. The first method (amplitude detection) provides a simple way to study the head disk spacing change. The second method ( PW50 parameter estimation) can ...
متن کاملAn Experimental Study of Head Instabilities in TMR Sensors for Magnetic Recording Heads with Adaptive Flying Height
We did an experimental study to investigate the effect of the thermal stress due to the heater for adjusting adaptive flying height (AFH) on the readability and instability of tunneling magnetoresistance (TMR) sensors. The slider head consists of a small heater nearby the read/write elements for controlling the clearance between the read/write elements and the recording medium of the magnetic r...
متن کامل