Mechanical Properties Measurement of Nanowires Anisotropic Conductive Film by Nanoindentation Technique
نویسندگان
چکیده
As microelectronic packaging industry grows explosively, high I/O density interconnects and reliable packaging design are recognized as the main concern of the IC packaging industry. Hence, in this investigation, a novel type of anisotropic conductive film (ACF) composed of cobalt nanowires and polymer was developed and used in place of conventional solder bumps for ultra-fine pitch interconnect. Unlike some other ACF materials that blend either nanowires, tubes, or powders in polymer, the nanowires entrenched in polymer is well aligned in one direction so as to achieve high anisotropic conductance. Basically, the material properties of the nanowire/polymerbased conductive film would have a great effect on the thermal-mechanical behaviors of the technology, which would generally lead to a reliability issue. Thus, the underlying goal of the study was to characterize the out-ofplane mechanical properties, including reduced modulus and hardness, through a nanoindentation technique. The tip of nanoindentation was 300nm in diameter and measured method was force-control. Results show that the mean value of the reducedmodulus of the film is 14.471GPa at a standard deviation of 2.578GPa. These statistical results were based on 102 data points with high consistency.
منابع مشابه
Numerical study on the measurement of thin film mechanical properties by means of nanoindentation
Nanoindentation is a technique commonly used for measuring thin film mechanical properties such as hardness and stiffness. In this study, we used the finite element method to investigate the effect of substrate and pileup on hardness and stiffness measurements of thin film systems. We define a substrate effect factor and construct a map that may be useful in the interpretation of indentation me...
متن کاملA Brief Review of Nanoindentation Technique and its Applications in Hybrid Nanocomposite Coatings
Nanoindentation techniques are widely used for the study of nanomechanical properties of thin nanocomposite coatings. Theoretical concepts and practical use of nanoindentation method are summarized with reporting the applications of these tests in characterization of some particular thin nanocomposite hybrid coatings prepared by sol-gel process. The better mechanical properties can be obtained ...
متن کاملA Brief Review of Nanoindentation Technique and its Applications in Hybrid Nanocomposite Coatings
Nanoindentation techniques are widely used for the study of nanomechanical properties of thin nanocomposite coatings. Theoretical concepts and practical use of nanoindentation method are summarized with reporting the applications of these tests in characterization of some particular thin nanocomposite hybrid coatings prepared by sol-gel process. The better mechanical properties can be obtained ...
متن کاملSynthesis and enhanced mechanical properties of nano Zinc Oxide in Polyvinyl alcohol and Polyvinyl pyrollidone composite film
Zinc oxide nanoparticles have been synthesized by chemical reaction method. Polyvinyl alcohol (PVA) composite film filled with nanometric, monodispersed zinc oxide nano particles prepared by PVA solution and nanozinc oxide. Polymer blend with ZnO nanoparticle composite film has prepared by casting technique. The property of nano composites depends greatly on the chemistry of polymer matrices....
متن کاملNanomechanical Characterization of Indium Nano/Microwires
Nanomechanical properties of indium nanowires like structures fabricated on quartz substrate by trench template technique, measured using nanoindentation. The hardness and elastic modulus of wires were measured and compared with the values of indium thin film. Displacement burst observed while indenting the nanowire. 'Wire-only hardness' obtained using Korsunsky model from composite hardness. N...
متن کامل