7 S ep 2 00 6 Nanostructure and microstructure of laser - interference induced dynamic patterning of Co on
نویسنده
چکیده
We have investigated the nanostructure and microstructure resulting from ns laser irradiation simultaneous with deposition of Co films on Si(001) substrates. The spatial order and length scales of the resulting nanopatterns and their crystalline microstructure were investigated as a function of film thickness h and laser energy density E using a combination of atomic force, scanning electron and transmission electron microscopies. The results could be classified into two distinct categories based on the laser energy density used. It was observed that the thickness-dependent E required to melt the Co film (ECo) was lower than Si (ESi) primarily because of the higher reflectivity of Si. Consequently, for energy densities ECo < E1 < ESi that preferentially melted the Co film, spatially ordered nanoparticles were formed and were attributed to capillary-driven transport in the liquid phase. The ordering length scale corresponded to the interference fringe spacing Λ and the microstructure was primarily Co metal and a metal-rich silicide phase. The native oxide layer played an important role in minimizing the Co-Si reaction. For laser energy densities E2 ≥ ESi, spatially ordered patterns with periodic length scales L < Λ were observed and resulted from interference of an incident laser beam with a beam transmitted into the Si substrate. These nanopatterns showed oneas well as two-dimensional spatial ordering of the nanostructures. The microstructure in this laser energy regime was dominated by silicide formation. These results suggest that various nanostructures and microstructures, ranging from nearly pure metal to a Si-rich silicide phase can be formed by appropriate choice of the laser energy simultaneous with film growth. ∗[email protected]
منابع مشابه
Nanostructure and microstructure of laser-interference-induced dynamic patterning of Co on Si
We have investigated the nanostructure and microstructure resulting from simultaneous ns laser irradiation with deposition of Co films on Si(001) substrates. The spatial order and length scales of the resulting nanopatterns and their crystalline microstructure were investigated as a function of film thickness h and laser energy density E using a combination of atomic force, scanning electron an...
متن کاملFabrication and Optical Characterization of Silicon Nanostructure Arrays by Laser Interference Lithography and Metal-Assisted Chemical Etching
In this paper metal-assisted chemical etching has been applied to pattern porous silicon regions and silicon nanohole arrays in submicron period simply by using positive photoresist as a mask layer. In order to define silicon nanostructures, Metal-assisted chemical etching (MaCE) was carried out with silver catalyst. Provided solution (or materiel) in combination with laser interference lithogr...
متن کاملFabrication of Hierarchical Structures by Direct Laser Writing and Multi-Beam-Interference
We present a new method for the creation of hierarchical structures by two subsequent steps of laser ablation. To create certain functionalization of surfaces hierarchical structures are often required. These structures can be considered as a microstructure with a superposed nanostructure. Therefore the approach presented in this paper divides the patterning process into two parts: The microstr...
متن کاملDetermination of epinephrine in the presence of uric acid and folic acid using nanostructure-based electrochemical sensor
Fabrication and electrochemical characterization of a sensor for the determination of epinephrine (EP), uric acid (UA) and folic acid (FA) is described. The sensor was prepared using carbon paste electrode (CPE) modified with 3,4-dihydroxybenzaldehyde-2,4-dinitrophenylhydrazone (DDP) and carbon nanotubes (CNTs), which makes the modified electrode highly sensitive for the electrochemical detect...
متن کاملInfluence of shielding gas composition on weld structure in pulsed Nd: YAG laser welding
This work studied the effect of additions of carbon dioxide to argon shielding gas on the weld shape and microstructure of ST14 steel in pulsed Nd: YAG laser welding. By additions of carbon dioxide up to 15%,the weld area and depth/width ratio decreases while rising of carbon dioxide up to 25% causes increasing of weld area and depth/width ratio. It is observed that the weld metal microstructur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006