Nonlinear Model Predictive Control of Combined Cycle Power Plants
نویسندگان
چکیده
The recent widespread diffusion of Combined Cycle Power Plants (CCPPs) is due to crucial technological advantages with respect to oil or coal fired plants. Among them, CCPPs guarantee higher efficiency and lower emissions. However, in the context of a deregulated energy market, better performances of the CCPPs control schemes are required during load transitions to allow for their use in grid frequency regulation. In this paper, an innovative Nonlinear Model Predictive Control (NMPC) strategy is applied for the regulation of a detailed nonlinear model of CCPPs, specifically designed for control purposes and validated on real plant data. In particular, the steam temperatures of the Heat Recovery Steam Generator (HRSG) are controlled with NMPC and the plant efficiency is improved at partial load. The obtained results are compared to those achieved with a standard control scheme where the PID regulators have been accurately tuned to optimize the control performance. Copyright c ©2005 IFAC
منابع مشابه
Nonlinear Modelling of Kerman Combined Cycle Power Plant Drum-Boiler and Drum Level control especially in trip conditions
There are various methods of power generation such as combined cycle power plants. There are many variables in a power plant boiler unit, but the most important variables are Pressure and specially drum level that control system should be put it in the safe range. The purpose of this article is, modifying the oscillatory behavior of the drum level of Kerman combined cycle power plant and especi...
متن کاملActive and reactive power control via currents of a rotor’s d and q components with nonlinear predictive control strategy in a doubly fed induction generator based on wind power system
Wind energy today, has attracted widespread interest from among a variety of sources of renewable energy in the world. Owing to the increasing demand for production of electrical energy for electricity networks by using wind power, it is essential that wind power plants are actively incorporated in the network’s performance using an appropriate control system. In general, these wind power plant...
متن کاملActive and reactive power control via currents of a rotor’s d and q components with nonlinear predictive control strategy in a doubly fed induction generator based on wind power system
Wind energy today, has attracted widespread interest from among a variety of sources of renewable energy in the world. Owing to the increasing demand for production of electrical energy for electricity networks by using wind power, it is essential that wind power plants are actively incorporated in the network’s performance using an appropriate control system. In general, these wind power p...
متن کاملModeling and Supervisory Control Design for a Combined Cycle Power Plant
The traditional control strategy based on PID controllers may be unsatisfactory when dealing with processes with large time delay and constraints. This paper presents a supervisory model based constrained predictive controller (MPC) for a combined cycle power plant (CCPP). First, a non-linear dynamic model of CCPP using the laws of physics was proposed. Then, the supervisory control using the l...
متن کاملNonlinear Model Predictive Control for Combined Cycle Power Plants
This master thesis project serves to investigate the possibilities of Nonlinear Model Predictive Control (NMPC) using the example of enthalpy control of the BENSON HRSG (heat recovery steam generator) of a combined cycle power plant (CCPP). The general idea of NMPC is to solve an optimization problem, to find the next control action, and this optimization problem is based on a model of the syst...
متن کامل