Development of Pipe-Crawling Robot for Pipeline Network Discovery
ثبت نشده
چکیده
منابع مشابه
On The In-pipe Inspection Robots Traversing Through Elbows
A general robotic mechanism was presented for in-pipe inspection oflevel pipes with varied diameter or curved pipelines. The robot employed three legs comprised of parallelogram linkages mechanism which enables adapting to various elbow joints in the piping systems. The curvatures in pipeline are the most important constraints in front of the robot through navigation process. To study the adapt...
متن کاملDevelopment of a Pipeline Monitoring System by Bio-mimetic Robots
To explore pipelines is one of various bio-mimetic robot applications. The robot may work in common buildings such as between ceilings and ducts, in addition to complicated and massive pipeline systems of large industrial plants. The bio-mimetic robot finds any troubled area or malfunction and then reports its data. Importantly, it can not only prepare for but also react to any abnormal routes ...
متن کاملDeWaLoP-Monolithic Multi-module In-Pipe Robot System
This paper describes the multi-module configuration of the Developing Water Loss Prevention – DeWaLoP – in-pipe robot system. The system objective is to redevelop the pipes of the over 100 years old fresh water supply systems of Vienna and Bratislava by crawling into water canals of about 1 meter in diameter and applying a restoration material to repair the pipes. Inpipe robots with multiple mo...
متن کاملPipe inspection robot pdf
Diameter pipe.robot, called the Multifunctional Robot for IN-pipe inSPECTion. In-pipe robots, which have a long history of development in robotics, can be.This paper describes a mobile feeder pipe inspection robot that can minimize the irradiation dose to human workers by automating the measurement process.Recently, many pipe inspection robot systems have been developed. Initially, development ...
متن کاملIntrinsic Tactile Sensing for the Optimization of Force Distribution in a Pipe Crawling Robot
This paper describes a tactile sensing system based on a force/torque sensor for the feet of a pipe crawling robot. Such a sensing system is needed for better optimization of force and joint load distribution and a safer avoidance of the risk of foot slippage. While conventional tactile sensing devices typically provide information concerning the spatial distribution of normal pressures, the in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015