A new parameter identification method to obtain change in smooth musclecontraction state due to mechanical skin irritation

نویسندگان

  • DANIELA BAUER
  • REINHARD GREBE
  • ALAIN EHRLACHER
  • Daniela Bauer
چکیده

Submitted for the MAR05 Meeting of The American Physical Society A new parameter identification method to obtain change in smooth musclecontraction state due to mechanical skin irritation DANIELA BAUER, REINHARD GREBE, ALAIN EHRLACHER, Ecole Nationale des Ponts et Chaussees — A light scratch with a needle induces histamine and neuropetide release on the line of stroke and in the surrounding tissue. Histamine and neuropeptides are vasodilaters. They create vasodilation by changing the contraction state of the vascular smooth muscles and hence vessel compliance. Smooth muscle contraction state is very difficult to measure. We propose an identification procedure that determines change in compliance. The procedure is based on numerical and experimental results. Blood flow is measured by Laser Doppler Velocimetry. Numerical data is obtained by a continuous model of hierarchically arranged porous media of the vascular network [1]. We show that compliance increases after the stroke in the entire tissue. Then, compliance decreases in the surrounding tissue, while it keeps increasing on the line of stroke. Hence, blood is transported from the surrounding tissue to the line of stroke. Thus, higher blood volume on the line of stroke is obtained. [1] Bauer, D., Grebe, R. Ehrlacher, A., 2004. A three layer continuous model of porous media to describe the first phase of skin irritation. J. Theoret. Bio. in press Daniela Bauer Ecole Nationale des Ponts et Chausses Date submitted: 29 Nov 2004 Electronic form version 1.4

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder

Honing is a process for finishing surfaces to obtain smooth surface. This process is used for final polish of inner parts such as engines cylinders. Optimizing this process has always been a big challenge for mass production of cylinder blocks of internal combustion engines. Honing process has some variable parameters, thus to get their optimum rates the automobile cylinders were tested. In thi...

متن کامل

Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder

Honing is a process for finishing surfaces to obtain smooth surface. This process is used for final polish of inner parts such as engines cylinders. Optimizing this process has always been a big challenge for mass production of cylinder blocks of internal combustion engines. Honing process has some variable parameters, thus to get their optimum rates the automobile cylinders were tested. In thi...

متن کامل

Thermo-Mechanical Vibration Analysis of FG Circular and Annular Nanoplate Based on the Visco-Pasternak Foundation

In this study, the vibration behavior of functional graded (FG) circular and annular nanoplate embedded in a Visco-Pasternak foundation and coupled with temperature change is studied. The effect of in-plane pre-load and temperature change are investigated on the vibration frequencies of FG circular and annular nanoplate. To obtain the vibration frequencies of the FG circular and annular nanopla...

متن کامل

Parameter Identification of a Brushless Resolver Using Charge Response of Stator Current

Because of temperature independence, high resolution and noiseless outputs, brushless resolvers are widely used in high precision control systems. In this paper, at first dynamic performance characteristics of brushless resolver, considering parameters identification are presented. Then a mathematical model based on d-q axis theory is given. This model can be used for studying the dynamic b...

متن کامل

Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation

In this study, the vibration behavior of functional graded (FG) circular and annular nanoplate embedded in Visco-Pasternak foundation and coupled with temperature change is studied. It is assumed that a uniform radial magnetic field acts on the top surface of the plate and the magnetic permeability coefficient of the plate along its thickness are assumed to vary according to the volume distribu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012