A theoretical study of a thin-film delamination using shaft-loaded blister test: Constitutive relation without delamination
نویسنده
چکیده
This paper presents exact solutions for nonlinear large deflection of thin circular membrane loaded by a central point force using blister test with two types of boundary conditions and with or without residual stress cases. A comparisonwith existing solutions is presented, and a geometrically nonlinear finite element analysis (FEA) is conducted to verify our analytical solutions. & 2008 Elsevier Ltd. All rights reserved.
منابع مشابه
Theoretical Study on Synchronous Characterization of Surface and Interfacial Mechanical Properties of Thin-Film/Substrate Systems with Residual Stress Based on Pressure Blister Test Technique
In this study, based on the pressure blister test technique, a theoretical study on the synchronous characterization of surface and interfacial mechanical properties of thin-film/substrate systems with residual stress was presented, where the problem of axisymmetric deformation of a blistering film with initial stress was analytically solved and its closed-form solution was presented. The expre...
متن کاملSub-critical telephone cord delamination propagation and adhesion measurements
Thin film delamination can occur when the stored elastic energy per unit area in the film due to the residual stress exceeds the interfacial toughness. Telephone cord morphology is commonly observed in delaminating thin films under compressive stresses. Here, the biaxial film stress is partially relieved by film buckling in the direction perpendicular to the telephone cord propagation, and by "...
متن کاملStability of Straight Delamination Blisters
We consider the buckle-driven delamination of biaxially compressed thin films. Telephone-cord-like patterns observed in experiments are explained as a result of the buckling behavior of the film. We perform a stability analysis of a straight blister. A mechanism of instability causing undulations in an advancing finger of delamination is pointed out, which we claim to be the basic phenomenon ex...
متن کاملInfluence of substrate compliance on buckling delamination of thin films
A thin film subject to in-plane compressive stress is susceptible to buckling-driven delamination. This paper analyzes a straight-sided delamination buckle with a focus on the effects of substrate compliance, following earlier work by B. Cotterell and Z. Chen. The critical buckling condition, the energy release rate and the mode mix of the interface delamination crack are calculated as a functi...
متن کاملMode Dependent Toughness and the Delamination of Compressed Thin Films
We consider the buckle-driven delamination of compressed thin lms. For a wide class of patterns of delamination, it is shown that the loading on the delamination front progressively goes from mode I to mode II during growth of the blister. As a result, the mode dependence of the lm/substrate interface excludes widespread delamination. This explains the observations of blisters of nite extent, w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008