Gauss-PSO Parameter Identification Algorithm for Single-Phase Induction Motors
نویسنده
چکیده
This paper proposes a new parameter identification approach for a single-phase induction motor (SPIM) whose parameters are usually obtained using several traditional techniques such as the DC, no-load, load and locked-rotor tests. It can be realized that the traditional techniques are complicated and require a higher cost with extra equipment. The proposal is based on using a Gauss particle swarm optimization (Gauss-PSO) algorithm. The Gauss-PSO algorithm modifies the algorithm parameters to improve the performance of the standard PSO algorithm. The algorithms use the experimental measurements of the currents and active powers in the SPIM main and auxiliary windings as the inputs to the parameter estimator. The experimental results obtained compare the identified SPIM parameters with the SPIM parameters achieved using the traditional tests. There is also a comparison of the solution quality between the standard PSO and Gauss-PSO algorithms. The results show that the Gauss-PSO algorithm is better than the standard PSO algorithm for parameter identification of the SPIM.
منابع مشابه
Application of Intelligent Search Techniques to Identify Single-Phase Induction Motor’s Parameters
This paper presents an intelligent approach to identify parameters of single-phase induction motors. Because of the complication of space-phasor equations describing its dynamic behaviors, the parameters of single-phase induction motors could be roughly estimated via conventional tests based on the steady-state analysis. Therefore, they may cause inaccurate estimation. In this paper, some effic...
متن کاملOptimal Design of Single-Phase Induction Motor Using MPSO and FEM
In this paper, a new approach is proposed for the optimum design of single-phase induction motor. By using the classical design equations and the evolutionary algorithms such as Genetic Algorithms (GA), Particle Swarm Optimization (PSO) and Modified Particle Swarm Optimization (MPSO), a Single Phase Induction Motor (SPIM) was designed with the maximum efficiency. The Finite Element Method (FEM)...
متن کاملAn Improved Big Bang-Big Crunch Algorithm for Estimating Three-Phase Induction Motors Efficiency
Nowadays, the most generated electrical energy is consumed by three-phase induction motors. Thus, in order to carry out preventive measurements and maintenances and eventually employing high-efficiency motors, the efficiency evaluation of induction motors is vital. In this paper, a novel and efficient method based on Improved Big Bang-Big Crunch (I-BB-BC) Algorithm is presented for efficiency e...
متن کاملHybrid PSO-Complex Algorithm Based Parameter Identification for a Composite Load Model
This paper proposes a hybrid searching algorithm based on parameter identification for power system load models. Hybrid searching was performed by the combination of particle swarm optimization (PSO) and a complex method, which enhances the convergence of solutions closer to minima and takes advantage of global searching with PSO. In this paper, the load model of interest is composed of a ZIP m...
متن کاملارزیابی عملکرد الگوریتمهای فراابتکاری در تخمین پارامترهای ساختاری موتور القایی قفسه سنجابی
Induction motors are so important in industry, so their protection and maintenance seem a vital issue. Continuous control of structural parameter of such motors is the way that can protect them. Appearance of a small problem in motor can change the value of structural parameter of squirrel cage induction motor, such as; resistances of stator and rotor, inductances of stator an...
متن کامل