Diagnosing Faults Co-operatively and in Context
نویسنده
چکیده
The combination of an automatic fault diagnosis module and an electronic troubleshooting manual results in a support system which allows a close interrelation of human and machine fault diagnosis performance. The electronic manual acts as a cognitive interface and puts the suggestions of the automatic fault diagnosis module into the context of related knowledge so that they can be easily verified by the human diagnostician.
منابع مشابه
Applying Frequency Response method for contact Rails Fault Diagnosing in Ungrounded Electrical Railway System
Abstract General faults in regular electrical railways system could be detect by implementing the specific protection functions such as ground fault or sensitive earth fault. Otherwise, in ungrounded electrical railway systems which using both feeding and return contact rail at the same time, fault detection cannot done with above-mentioned function. Due to recent growth in electrical railway ...
متن کاملTowards a Software-Hardware Co-Designed Resilient System
With continued CMOS scaling, future shipped hardware will be increasingly vulnerable to in-the-field faults. To be broadly deployable, the hardware reliability solution must incur low overheads, precluding use of excessive redundancy. We explore a co-designed hardwaresoftware solution that treats most hardware faults as software bugs and leverages common mechanisms for hardware and software rel...
متن کاملIdentifying Faults in 802.11 Networks With Device Driver Statistics
As consumer grade networking hardware has become ubiquitous in households there is an increasing need for a tool that can simplify diagnosing 802.11 network faults. There are several tools available for diagnosing faults in large scale networks. A consumer grade diagnosis tool must be trivial to set up and provide straightforward indication of network faults. Today, consumers are limited to usi...
متن کاملDiagnosing Single Faults for Interconnects in SRAM Based FPGAs
This paper presents a method to diagnose faults in FPGA interconnection resources. A single fault model is given. Under the given model, a diagnosing method is proposed. At most five programming steps in the proposed method is required if adaptive testing scheme is used. For non-adaptive test, eight programming steps is required to diagnose all the possible faults under the given single fault m...
متن کاملOn Monitoring and Diagnosing Classes of Discrete Event Systems
ON MONITORING AND DIAGNOSING CLASSES OF DISCRETEEVENT SYSTEMS byOlivier Contant Co-Chairs: Stéphane Lafortune and Demosthenis Teneketzis This thesis addresses three detection and diagnosis problems for systems with event-driven dynamics. First, the diagnosis of “intermittent” faults in discrete event dynamicsystems is considered. A modeling methodology for discrete event systems...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007