Draft Report: Energy Savings for Load- Shedding Ballast for Fluorescent Lighting Systems
نویسندگان
چکیده
منابع مشابه
Task 4.2 Investigate Ideal Lamp Light Output Dimming Ratio Required for Different Types of Applications
The overall scope of this project funded by the US Department of Energy (DOE) is to recommend means of reducing barriers to the wide spread use of lighting controls for commercial/industrial (C/I) applications using fluorescent systems. It is important to note that this project is focused on load-shed applications and photoelectric dimming where energy savings and energy management are of centr...
متن کاملStreetlight Control System Based on Wireless Communication over DALI Protocol
Public lighting represents a large part of the energy consumption of towns and cities. Efficient management of public lighting can entail significant energy savings. This work presents a smart system for managing public lighting networks based on wireless communication and the DALI protocol. Wireless communication entails significant economic savings, as there is no need to install new wiring a...
متن کاملEnergy Conservation Utilizing Wireless Dimmable Lighting Control in a Shared-Space Office
Overhead light fixtures in shared-space offices are typically grouped into banks, each of which is controlled by a single switch. Even in offices with daylight responsive systems, the luminaires are divided into zones controlled by one photosensor per zone. Too often, the geographically-defined “zone” does not correspond to occupied areas, and energy is wasted illuminating the unoccupied areas....
متن کاملHigh Frequency Resonant Inverter for Group Dimming Control of Fluorescent Lamp Lighting Systems
Fluorescen t power SUPPlY Dimmer I Electronic bal last I Lamp IAn electronic ballast for fluorescent lamp lighting using a new resonant inverter is proposed. The electronic ballast has high efficiency, light wcight and small sizc bccause the resonant inverter operates at high frequencies with low switching losses. The inverter output power can be continuously controlled by regulating the L-C re...
متن کاملSpecifier Reports: Photosensors (March 1998)
A photosensor is an electronic control device that adjusts the light output of a lighting system based on detected illuminance. While some photosensors simply switch lights on and off, Specifier Reports: Photosensors focuses on photosensors that are used with dimming electronic ballasts to adjust the light output of fluorescent lighting systems over a continuous range. These photosensors are mo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003