CNFs @ CNTs : Superior Carbon for Electrochemical Energy Storage * *
نویسندگان
چکیده
** The authors are indebted to the Max Planck Society and acknowledge support within the framework of the ENERCHEM project. The authors would like to acknowledge technical assistance from the Combicat Centre, Universiti Malaya (Kuala Lumpur, Malaysia); Edith Kitzelmann, Fritz-Haber-Institut; and Dr. Andreja Gajović, Molecular Physics Laboratory, Rudjer Boskovic Institute (Zagred, Croatia). Supporting Information is available online from Wiley InterScience or from the author.
منابع مشابه
Carbon Nanotubes Produced from Ambient Carbon Dioxide for Environmentally Sustainable Lithium-Ion and Sodium-Ion Battery Anodes.
The cost and practicality of greenhouse gas removal processes, which are critical for environmental sustainability, pivot on high-value secondary applications derived from carbon capture and conversion techniques. Using the solar thermal electrochemical process (STEP), ambient CO2 captured in molten lithiated carbonates leads to the production of carbon nanofibers (CNFs) and carbon nanotubes (C...
متن کاملEncapsulation of MnO Nanocrystals in Electrospun Carbon Nanofibers as High-Performance Anode Materials for Lithium-Ion Batteries
A novel and controllable approach is developed for the synthesis of MnO nanocrystals embedded in carbon nanofibers (MnO/CNFs) through an electrospinning process. The as-formed MnO/CNFs have a porous structure with diameters of 100-200 nm and lengths up to several millimeters. When used as an anode material for lithium-ion batteries, the resulting MnO/CNFs exhibit superior electrochemical perfor...
متن کاملSynthesis and Electrochemical Lithium Storage Behavior of Carbon Nanotubes Filled with Iron Sulfide Nanoparticles
Carbon nanotubes (CNTs) filled with iron sulfide nanoparticles (NPs) are prepared by inserting sulfur and ferrocene into the hollow core of CNTs followed by heat treatment. It is found that pyrrhotite-11T iron sulfide (Fe-S) NPs with an average size of ≈15 nm are encapsulated in the tubular cavity of the CNTs (Fe-S@CNTs), and each particle is a single crystal. When used as the anode material of...
متن کاملThe morphology, porosity and productivity control of carbon nanofibers or nanotubes on modified activated carbon
Since their discovery, carbon nanotubes and carbon nanofibers (CNTs or CNFs) have exhibited potential in a wide range of physical and chemical applications [1] and [2]. For applications in gas phase catalysis, loose CNTs or CNFs are unsuited because they limit the catalyst–reactant transport properties and they are difficult to handle when filling in the reactor tubes. In addition, there is a h...
متن کاملAnchoring CoFe2O4 Nanoparticles on N‐Doped Carbon Nanofibers for High‐Performance Oxygen Evolution Reaction
The exploration of earth-abundant and high-efficiency electrocatalysts for the oxygen evolution reaction (OER) is of great significant for sustainable energy conversion and storage applications. Although spinel-type binary transition metal oxides (AB2O4, A, B = metal) represent a class of promising candidates for water oxidation catalysis, their intrinsically inferior electrical conductivity ex...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008