Three Experiments to Analyze the Nature of the Heat Spreader

نویسندگان

  • Seema Sethia
  • Shouri Chatterjee
  • Sunil Kale
  • Amit Gupta
  • Smruti R. Sarangi
چکیده

In this paper, we describe ongoing work to investigate the properties of the heat spreader, and its implication on architecture research. In specific, we conduct two experiments to quantify the heat distribution across the surface of a spreader during normal operation. The first experiment uses T-type thermocouples, to find the temperature difference across different points on the spreader. We observe about 6◦C difference on average. In the second experiment, we try to capture the temperature gradients using an infrared camera. However, this experiment was inconclusive because of some practical constraints such as the low emissivity of the spreader. We conclude that to properly model the spreader, it is necessary to conduct detailed finite element simulations. We describe a method to accurately measure the thermal conductivity of the heat spreader such that it can be used to compute the steady state temperature distribution across the spreader.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Analysis of a Miniature-Scale Refrigeration System (MSRS) for Electronics Cooling

This paper presents the numerical analysis of a Miniature-Scale Refrigeration System (MSRS) for electronics cooling. The system consists of a simulated electronic chip attached to a microchannel cold plate evaporator, a compressor, a microchannel condenser, and an expansion device. The system uses R-134a as the refrigerant. A copper block heater is designed to simulate the heat generation of an...

متن کامل

Nickel Plated Copper Heat Spreader Surface Characteristics

Nickel plated copper heat spreader acts as a medium to dissipate heat from silicon die towards heat-sink. Electroless nickel plating requires catalytic activation before the nickel can be deposited onto copper. Different catalytic activation techniques such as galvanic initiation and thin nickel-copper electrodeposition have diverse impact on the thermal performance of the heat spreader. Surfac...

متن کامل

Effects of spreader penetration depth on the quality of apical seal

Effects of spreader penetration depth on the quality of apical seal Dr. M. Alaeddini* - Dr. M. Parirokh** * - Oral and Maxillofacial pathologist – Dental Research Centre – Tehran University of Medical Sciences. **- Associate professor of Endodontics Dept. – Faculty of Dentistry – Kerman University of Medical Sciences. Background and Aim: A proper root canal filling is accomplished by complete o...

متن کامل

Micro Cooling Application on High Density Memory Module

The numerical simulation and two kinds of experiments are conducted to investigate the thermal performance of several kinds of heat spreaders for high power memory module. For numerical study, commercial code, Flotherm, is used to model the 1GByte DDR memory module array. The convection heat transfer is analyzed for the memory module array with solid heat spreader under the airflow condition. F...

متن کامل

ABSTRACT Title of Ph.D. Dissertation: THIN TWO-PHASE HEAT SPREADERS WITH BOILING ENHANCEMENT MICROSTRUCTURES FOR THERMAL MANAGEMENT OF ELECTRONIC SYSTEMS

Title of Ph.D. Dissertation: THIN TWO-PHASE HEAT SPREADERS WITH BOILING ENHANCEMENT MICROSTRUCTURES FOR THERMAL MANAGEMENT OF ELECTRONIC SYSTEMS Sunil S Murthy, Doctor of Philosophy, 2004 Dissertation directed by: Professor Yogendra K. Joshi Department of Mechanical Engineering The current study goes over a design methodology for thin, two-phase heat spreaders for space constrained cooling appl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • CoRR

دوره abs/1402.6903  شماره 

صفحات  -

تاریخ انتشار 2014