Triangular Power Supply Based Adiabatic Logic Family
نویسندگان
چکیده
Submitted: Jan 13, 2013; Accepted: Feb 26, 2013; Published: Aug 18, 2013 Abstract: This paper presents the design and performance evaluation of a modified complementary energy path adiabatic logic (MCEPAL) circuit. A simulative investigation on the proposed MCEPAL based, multiplexer, JK flip flop and 3 bit counter has been done using VIRTUOSO SPECTRE simulator of cadence in 0.18μm UMC technology and its performance has been compared with the previous adiabatic (i.e. CEPAL) multiplexer, JK flip flop and 3 bit counter circuits. The MCEPAL based, multiplexer, JK flip flop and 3 bit counter circuit exhibits the power saving of 77%, 25% and 48% respectively to its corresponding CEPAL circuits at 100 MHz frequency and 1.8V operating voltage.
منابع مشابه
Design of Sequential Circuit using Low Power Adiabatic Complementary Pass Transistor Logic
Adiabatic logic style is Proving to be an attractive solution for low power digital design. The paper investigates low – power characteristics of complementary pass -transistor logic (CPL) circuits using AC power supply. The two-phase power-clock scheme is more suitable for the design of flip-flops and sequential circuits because it uses fewer transistors. The Adiabatic flip-flop have large ene...
متن کاملUltra Low Power Symmetric Pass Gate Adiabatic Logic with CNTFET for Secure IoT Applications
With the advent and development of the Internet of Things, new needs arose and more attention was paid to these needs. These needs include: low power consumption, low area consumption, low supply voltage, higher security and so on. Many solutions have been proposed to improve each one of these needs. In this paper, we try to reduce the power consumption and enhance the security by using SPGAL, ...
متن کاملDesign and Experimental Verification of a CMOS Adiabatic Logic with Single-Phase Power-Clock Supply
A new adiabatic CMOS logic that operates from a single-phase power-clock is presented. A simple and efficient power-clock generator is integrated with the logic to generate the required AC power-clock supply waveform. Circuit performance is evaluated using a chain of inverters realized in 1.2μm technology. Experimental results show energy savings comparable to other adiabatic logic families t...
متن کاملDesign of Low Power VLSI Circuits using Energy Efficient Adiabatic Logic
Abstract—In this paper, a new design of adiabatic circuit, called energy efficient adiabatic logic (EEAL) is proposed. Earlier various diode based adiabatic logic families have been proposed. To achieve minimum energy consumption, this paper proposes a technique in which diode is replaced by MOS transistor at charging and discharging path whose gate is controlled by the power clocks. By using t...
متن کاملSupply clock generation (driver) circuit for 2PASCL
The paper presents a new quasi adiabatic logic family that uses two complementary split-level sinusoidal power supply clock for digital low power applications such as sensors. The proposed two-phase adiabatic static CMOS logic circuit (2PASCL) is using the principle of energy recovery and adiabatic switching. It has switching activity that is lower than dynamic logic and can be directly derived...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013