Experimental analysis of lateral impact on planar brittle material.

نویسندگان

  • F P M dos Santos
  • V C Barbosa
  • R Donangelo
  • S R Souza
چکیده

The fragmentation of alumina and glass plates due to lateral impact is studied. A few hundred plates have been fragmented at different impact velocities and the produced fragments are analyzed. The method employed in this work allows one to investigate some geometrical properties of the fragments, besides the traditional size distribution usually studied in former experiments. We found that, although both materials exhibit qualitative similar fragment size distribution function, their geometrical properties appear to be quite different. A schematic model for two-dimensional fragmentation is also presented and its predictions are compared to our experimental results. The comparison suggests that the analysis of the fragments' geometrical properties constitutes a more stringent test of the theoretical models' assumptions than the size distribution.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental analysis of lateral impact on planar brittle material: spatial properties of cracks.

The breakup of alkaline glass and alumina plates due to planar impacts on one of their lateral sides is studied. Particular attention is given to investigating the spatial location of the cracks within the plates. Analysis based on a phenomenological model suggests that bifurcations along the cracks' paths are more likely to take place closer to the impact region than far away from it, i.e., th...

متن کامل

Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact

In this research, the numerical and experimental analysis of the carbon fiber composite lattice conical structure has been performed to assess the buckling stability of the structure before and after the lateral impact. In the experimental analysis, the carbon fiber composite lattice conical structure was constructed with the winding method and using elastic molds and metal mandrel. In or...

متن کامل

Experimental, Franc2d, and DDM simulation to determine the anisotropic tensile strength of brittle material

In this paper, a compression-to-tensile load converter device is developed to determine the anisotropic tensile strength of brittle material. A cubic sample with an internal pore was used as the test specimen, and a series of finite element analysis and DDM simulations were performed thereafter to analyse the effect of pore dimensions on the stress concentration, as well as to render a suitable...

متن کامل

Experimental and Numerical Investigation of Lateral Loading of Thin –Walled Tube with Different Indenter

Impact is one of very important subjects which always have been considered in mechanical science. Nature of impact is such that which makes its control a hard task. Therefore it is required to present the transfer of impact to other vulnerable part of a structure, when it is necessary, one of the best method of absorbing energy of impact, is by using Thin-walled tubes these tubes collapses unde...

متن کامل

Meso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method

One of the key issues associated with using of composites in various applications is their tensile behavior. The tensile behavior of a composite material is strongly influenced by the properties of its constituents and their distribution. This paper focuses on gaining some insights into the tensile process of pure and hybrid woven composite reinforced with brittle and ductile yarns. For this pu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Physical review. E, Statistical, nonlinear, and soft matter physics

دوره 81 4 Pt 2  شماره 

صفحات  -

تاریخ انتشار 2010