Treatment Plan For: Single implant crown supported by a pre-fabricated abutment
ثبت نشده
چکیده
D6056 prefabricated abutment includes placement D6057 custom abutment includes placement D6058 abutment supported porcelain/ceramic crown D6059 abutment supported porcelain fused to metal crown (high noble metal) D6060 abutment supported porcelain fused to metal crown (predominantly base metal) D6061 abutment supported porcelain fused to metal crown (noble metal) D6062 abutment supported cast metal crown (high noble metal) D6063 abutment supported cast metal crown (predominantly base metal) D6064 abutment supported cast metal crown (noble metal) D6065 implant supported porcelain/ceramic crown D6066 implant supported porcelain fused to metal crown (titanium, titanium alloy, high noble metal) D6067 implant supported metal crown (titanium, titanium alloy, high noble metal) D6068 abutment supported retainer for porcelain/ceramic FPD D6069 abutment supported retainer for porcelain fused to metal FPD (high noble metal) D6070 abutment supported retainer for porcelain fused to metal FPD (predominantly base metal) D6071 abutment supported retainer for porcelain fused to metal FPD (noble metal) D6072 abutment supported retainer for cast metal FPD (high noble metal) D6073 abutment supported retainer for cast metal FPD (predominantly base metal) D6074 abutment supported retainer for cast metal FPD (noble metal) D6075 implant supported retainer for ceramic FPD
منابع مشابه
Stress Distribution in Natural Tooth and Implant Supported Removable Partial Denture with Different Attachment Types: A Photoelastic Analysis
Background and Aim: Different attachment designs have been developed to connect implant to natural teeth in partial dentures; however, adequate studies have not been performed to determine stress distribution patterns in these designs. The present study aimed to assess stress distribution patterns in natural tooth and implant supported removable partial denture with different attachment designs...
متن کاملThe Effect of Abutment Surface Roughness on the Retention of Implant-Supported Crowns Cemented with Provisional Luting Cement
Introduction: Surface roughness can increase the retention of castings by ridges and grooves that are microretentive. This study compared the retention of implant-supported crowns when used with 3 different surface roughness abutments and one temporary cement. Methods: Thirty solid abutments (ITI), 4 mm high, were divided into three groups randomly. In the first group, 10 abutments were roughen...
متن کاملAbutment fracture and the technique Used to Remove the fracture portion of the Abutmet: Case Report
Abstract This clinical report presents a case of abutment fracture, due to occlusal overload, occurred with an implant-supported restoration on right mandibular first molar of a female patient. After 6 months of prosthetic reconstruction implants, the patient returned to the clinic due to the loss of implant crown. The fractured fragment of the abutment with the screw protec...
متن کاملNew abutment for a screw-retained, implant-supported crown.
The 1-piece, implant-supported abutment and crown, colloquially described as the UCLA abutment, commonly is used to fabricate single, screw-retained crowns. This abutment was designed to allow attachment of the crown directly to the implant and requires a waxing and casting procedure by a laboratory technician. A new prefabricated abutment has been developed that uses a similar approach but doe...
متن کاملRestoration of a loose implant supported crown: a case report.
Cement-retained, single unit implant supported restorations have become a popular method to treat single tooth edentulous spaces. Occasionally, the clinician is faced with the situation in which the restoration demonstrates mobility. This case report describes the treatment rendered to a patient who presented with a chief complaint of a "loose implant" that had been restored with a cemented PFM...
متن کامل