Automated Weld Characterization Using the Thermoelectric Method
نویسندگان
چکیده
The effective assessment of the integrity of welds is a complicated NDE problem that continues to be a challenge. To be able to completely characterize a weld, detailed knowledge of its tensile strength, ductility, hardness, microstructure, macrostructure, and chemical composition is needed. NDE techniques which can provide information on any of these features are extremely important. In this paper, we examine a seldom used approach based on the thermoelectric (TE) effect for characterizing welds and their associated heat affected zone (HAZ).
منابع مشابه
A neural network and multiple regression method for the characterization of the depth of weld penetration in laser welding based on acoustic signatures
The need for the control of the depth of weld penetration has been and remains of a long term interest in the automated welding process. In this study, the relationship between the depth of weld penetration and the acoustic signal acquired during the laser welding process of high strength steels is investigated. The acoustic signals are first preprocessed by the spectral subtraction noise reduc...
متن کاملNovel Automated Method for Minirhizotron Image Analysis: Root Detection using Curvelet Transform
In this article a new method is introduced for distinguishing roots and background based on their digital curvelet transform in minirhizotron images. In the proposed method, the nonlinear mapping is applied on sub-band curvelet components followed by boundary detection using energy optimization concept. The curvelet transform has the excellent capability in detecting roots with different orient...
متن کاملAutomated Weld Integrity Analysis Using 3d Point Data
This paper describes a method for non-destructive evaluation of the quality of welds from 3D point data. The method uses a stereo camera system to capture high-resolution 3D images of deposited welds, which are then processed in order to extract key parameters of the welds. These parameters (the weld angle and the radius of the weld at the weld toe) can in turn be used to estimate the stress co...
متن کاملDeposition and characterization of SnO2:Sb thin films fabricated by the spray pyrolysis method
In this study, thin films of transparent semiconductor tin oxide doped with antimony impurities on the glass substrates with different concentrations of antimony that have been prepared using spray pyrolysis method. The effects of different concentration of antimony on the structural, optical, and electrical properties of the thin films were investigated. Prepared layers were characterized by X...
متن کاملDevelopment of Experimental Techniques for Thermoelectric Properties Characterization of Low-Dimensional Structures
This work reports current efforts in developing experimental techniques applicable for thermoelectric properties characterization at micro and nanoscale. A one-dimensional transport model was used to asses the effects of heat leakage, non-symmetric boundary conditions, and electrical contact resistance, on thermoelectric properties measurements performed by transient Harman method. If the above...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1993