Characterization of oxide scales thermally formed on single-crystal silicon carbide.

نویسندگان

  • B Chayasombat
  • T Kato
  • T Hirayama
  • T Tokunaga
  • K Sasaki
  • K Kuroda
چکیده

Microstructures of oxide scales thermally formed on single-crystal silicon carbide were investigated using transmission electron microscopy. The oxide scales were formed on the Si-face of 6H-SiC at 1273-1473 K in dry oxygen. Spherical patterns were observed on the surfaces of the oxidized samples by an optical microscope in some regions. In these regions, cross-sectional transmission electron microscopy (TEM) observations show that the oxide scale was divided into two layers; the upper layer (surface side) was composed of crystalline silica, and the lower layer on the silicon carbide substrate was amorphous silica, while the oxide scales in the surroundings of the patterns were composed of only amorphous silica. The oxidation activation energy in the amorphous silica layer of the Si-face of 6H-SiC was found to be 408 kJ/mol by the evolution of thickness directly measured from the cross-sectional scanning electron microscopy and TEM images.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of increasing corundum on mechanical properties of silicon carbide refractories

Oxide materials such as Al2O corundum has a great influence on the mechanical and oxidation properties of refractory or refractory materials. In this paper, the effect of Al2O3 powder density, apparent porosity, linear shrinkage, and oxidation resistance of SiC composite refractory materials is investigated. Meanwhile, the compressive and flexural strengths were investigated before and after he...

متن کامل

Finite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites

The multi-scale finite element method is used to study the vibrational characteristics of polymer matrix reinforced by single-walled silicon carbide nanotubes. For this purpose, the nanoscale finite element method is employed to simulate the nanotubes at the nanoscale. While, the polymer is considered as a continuum at the larger scale. The polymer nanotube interphase is simulated by spring ele...

متن کامل

Mae pro O F Co Py [ 013 ] 013503 M Ae

We have demonstrated the ability to perform a ductile material removal operation, via single-point diamond turning, on single-crystal silicon carbide (6H). To our knowledge, this is the first reported work on the ductile machining of single-crystal silicon carbide (SiC). SiC experiences a ductile-to-brittle transition similar to other nominally brittle materials such as silicon, germanium, and ...

متن کامل

Fabrication and Characterization of High Frequency Phased Arrays for NDE Imaging

PMN-PT single crystal 1-3 composite high frequency phased arrays with center frequency of 35 MHz were fabricated and characterized for silicon carbide (SiC) NDE imaging applications. The 35 MHz 64-element array was successfully prototyped using PMN-PT single crystal and PC-MUT technology. The broad bandwidth > 90% and high sensitivity (echo amplitude > 500 mV from the impulse response with 0 ga...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of electron microscopy

دوره 59 Suppl 1  شماره 

صفحات  -

تاریخ انتشار 2010