A Critical Approach to the Biocompatibility Testing of Niti Orthodontic Archwires
نویسندگان
چکیده
Citation: Uzer B, Gumus B, Toker SM, Sahbazoglu D, Saher D, et al. (2016) A Critical Approach to the Biocompatibility Testing of Niti Orthodontic Archwires. Int J Metall Met Phys 1:003 Copyright: © 2016 Uzer B, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. *Corresponding author: SM Toker, Department of Materials Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA, Tel: 1805-756 -6441, Fax: 1805-756 2-299, Email: [email protected] Received: December 07, 2015: Accepted: February 06, 2016: Published: February 09, 2016 A Critical Approach to the Biocompatibility Testing of Niti Orthodontic Archwires
منابع مشابه
Frictional Properties of Self-Ligating Brackets and Low-Friction Ligatures
Problem statement: To evaluate the frictional forces generated by five different orthodontic brackets when used in combination with stainless steel and NiTi archwires in dry conditions at physiological temperature. Approach: Five different types of maxillary canine brackets (Damon 3 MX, Step, Quick, Sprint, Mini Mono) with a slot size 0.022 inch were coupled with 0.016” and 0.019”×0.025” stainl...
متن کاملComparison of deflection forces of esthetic archwires combined with ceramic brackets*
Coated archwires and ceramic brackets have been developed to improve facial esthetics during orthodontic treatment. However, their mechanical behavior has been shown to be different from metallic archwires and brackets. Therefore, the aim of this study was to compare the deflection forces in coated nickel-titanium (NiTi) and esthetic archwires combined with ceramic brackets. Material and Method...
متن کاملDo Mechanical and Physicochemical Properties of Orthodontic NiTi Wires Remain Stable In Vivo?
Introduction and Aim. Exceptional properties of the NiTi archwires may be jeopardized by the oral cavity; thus its long-term effect on the mechanical and physiochemical properties of NiTi archwires was the aim of work. Material and Methods. Study group comprised sixty 0.016 × 0.022 NiTi archwires from the same manufacturer evaluated (group A) after the first 12 weeks of orthodontic treatment. 3...
متن کاملDissimilar laser welding of NiTi shape memory alloy to austenitic stainless steel archwires
In this research, dissimilar welding of NiTi shape memory alloy to AISI 304 austenitic stainless steel Archwires was investigated. For this purpose, common straight orthodontic archwire with rectangular cross-section and dimensions of (0.635 × 0.432 mm) were selected and the laser welding technique was used to connect the wires. The microstructure, chemical composition and phasesin the weld zon...
متن کاملThe correlation between pain perception among patients with six different orthodontic archwires and the degree of dental crowding.
INTRODUCTION Forces generated in orthodontic treatment with fixed appliances create tension and compression zones in the periodontal ligament resulting in a painful experience for patients. In the first phase of orthodontic treatment, when leveling of teeth is needed, nickel-titanium (NiTi) archwires can be completely engaged in brackets, even in the cases of extreme crowding, exerting small fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016